Honda Spree and Elite 50 Forums

:*: Do you really need to keep making a new thread for each little thing you do? :eyeroll: Just add it to your 847 other "Project Forum" threads. not to be a * but he has a point kinda he said a thread per thing you do and well you didnt do anything and you started a thread, and y so we c...

bear i mean if you found a beater spree frame for like 50 bucks and i said keep it stock dont be the fastest just be the funniest

I will have to buy one so my Spree can keep it's stock motor. but the dark side (af16e) is fun too!!! you should pick up a beater spree and just try an af16e swap just so you can say you did it and to judge if people are nuts to swap :2thumbs: p.s. keep the af16e stock too its fun and very rideable...

humm i might have to buy

jaydog wrote:There is an o'ring on the new screw. Didn't notice on the original screw.JH

so does that mean problem solved?

is there an o ring on that screw or are we talking about something different?

im starting to think its just a story or it failed horribley for him cause if any one of us came up with one that worked we would be telling everyone! so till i see pics i call

im going to prove you all wrong motor comes out tonight will post a pic of finished product thats it umm no one said impossible i belive the words where hard impractical expensive really hard and possiblely not worth the money........ :roll: so go ahead prove to us you can do it then tell us how an...

dont call me a whiny little 10 yead old girl i started the thread so i will close it i wanted to know about different varis i didnt ask you all to tell me its to hard and not cost worthy i am willing to do it i dont care if it aint cost worthy i havent given up on the vari you lot have if its to ha...

I have 2 1988 Elites,first 1 had trouble idling and so adjusted mixture and then idle screw and ran like a top.2nd 1 ran fine but thought I would adjust carb just to do it. The Elite has not run well since.It will idle but no power (can't get off the spot no matter where adjust screws). I put new g...

Trafic if you get a design or fab an exsisting variator onto the elite e it will work on the spree as well. Let me know if you come up with anything. And yes you are correct spree parts will not make you rich. hehe And 45mph from a spree engine is no problem. An expansion chamber pipe, intake adapt...

i believe they make pipes for your scoot it would be the easy way

Yes there is, if the bolts are in good shape go to autozone or any auto parts store and buy a thread repair kit 6mm/1.00, remove carb and be sure to tape off all openings next carfully redrill bolt holes using 1/4 inch drill bit, then you will need to retapp hole using 8mm/1.00 tap, then you screw ...

If this mod ends up requiring a crank swap, you might as well drop the project right now. The average Spree owner is not gonna go to that kind of expense and effort. If they were then they would be swapping in any one of the variated 50 cc motors would be as a better option. now you get what i was ...

Just checked the two bolts that attach the carb to intakes. The long one is in the back, short one in the front but the short one in the front seems to be stripped as it will not tighten completely. I assume this may be why the engine wont stay started? Is there any way to remedy this at all withou...