Honda Spree and Elite 50 Forums

ehhh, i cut about .030 off the OD to get the ruck variator to clear the starter deal...

thats a razz, for sure.

yesss! i am very stoked to finally see euro style mini cars coming over here! 3 cyl diesel power!

i think what he means is to put a 4 barrel holley on it. ill make you a manifold adapter for it....

do you have a ratchet tie down? compress it with that, or just pull the spring off and measure compressed length without spring

dayum! those are all pretty frickin sweet if you ask me!!!

both...cops, around here at least, dont even look twice. i rode a wheelie past two cops in a parking lot once, my buddy caught up and was amazed that i didnt get busted. i didnt even see them! if you do get stopped, just say you bought it last weekend at a garage sale. most cops have better things t...

f*** it, im riding dirty too!!!

check the float bowl height, take the hose that the bowl drain is connected to, turn it up, so the end is above the carb, and open the drain fitting, the float bowl height will be the amount of fuel in the hose, i dont know the exact spec for the arreche, but its a start. other than that, check all ...

you can get a larger piece of hose that fits the fitting, and a reducer to connect that hose to your oil line hose, or muscle it on there as long as its not too too small...

if you guys are interested im putting together a mountain ride with the ruckus dudes, we are going to big bear, up the 18, and down the 38!!!!

im in redlands, sometimes i ride with some ruckus dudes, we go everywhere. been out to SGV, been to long beach! on scooters! haha

the circled deal is the port for the oil injection, i take it this is going on some sort of yamaha, jog or zuma? the large fitting on the other side is the inlet, pull the bowl and see if anything is obstructing the needle seat, and if you can blow through it...

ohh budget style? id do the cheapest one available and have fun with it! it will make plenty of power for a scooter.

out of the bag, the polini bore runs better than the malossi, i have both. the malossi supposedly has more potential for porting, but the castings looked about the same to me. the malossi really opens up when port matched, but so does the polini. if you going to fool around with it, either one is ve...