Honda Spree and Elite 50 Forums

ok thank u very much

can anyone tell me how to get a registration on my scooter in michigan with only a bill of sale. thank u

i just checked and the spark plug is a br6

the air box is on the engine. i am using regular gas and the oil that was in it when i got it. its blue in color. for the spark its an 8 but im not sure about the letters before the 8. i will check and report back

ok thanks. i just checked the plug and its a light brown color.

could the poppong be caused because its the e which is restricted so the govenor is kicking in.

they both look good

i have an 89 honda elite e and it runs great until it warms up. once it warms up it drops the speed down to 20 mph and the exhaust pops. while it was cold it was running 30 mph. once it starts popping i can stand up on the floor board and it will have a power boost until about 25 mph and wont pop as...

i got some work done on it yesturday. i cleaned the carb, changed the tires, and have all the plastic back on except the left side panel which i will do once i mount the air box. then all i will have to do is put on the rear lights and i hope i am good to go. can anyone tell me how do i check to mak...

y not do a picture contest and charge a set amount to enter the contest. you could give out prize money for the top 3 based on the amount of entries and money earned 25% for 1st 15% for 2nd and 10% for 3rd place and the remaining 50% goes to the board.

it doesnt have the airbox on it. when i got it it didnt have one which was alright because i have one for it but it ran good without it when i first got it. i was thinking about ugrading the gears and was wondering how much more speed this will give me. i found a 16*81 gear upgrade and was wondering...

so i cleaned the carb today and it will run when on the stand but once u take it off the stand it doent deem to have enough power to go and it boggs down. i checked the compression and it was about 100 psi. does anybody know what i should do next to fix this

so i went out to work on it today and it wont stay running. the only way to get it to stay running is to hand choke it and when it starts to bog out touch it again to get it to start reving up again. can anyone tell me how to fix this. thank u

alright. thanks guy i think i will pass on this.

i am looking at an elite 125 some guy is selling for $175. it has no plastic and it dont run. he says it has spark. i know parts are hard to find for these but is this a good deal and does anyone know where i can get all the plastics for it