Honda Spree and Elite 50 Forums

well genrally i test around 7 after i get home, not too much night testing, mostly because the head light sucks butt can never see much at all, if some one has any ideas or done mods on a brighter head light or more of them please send me the link and such, one more question? if i find and put the 8...

I have a rumia seems to work fine for me 49.2 MPH on flat with no wind and 9.8:1 gear ratio going up to 8.4:1 so the engine doesn't have to rev so high

I think might get a tiny tac I saw one of those but didint know how hard I'd was to install......

Any suggestions on a good cht gauge? And tach want them separate from speedometer thanks

So at what RPM does the greatest power come from and where does the best RPM range for fuel economy come from

:peace: I'm so happy!!!! Finally broke 45 my new top speed is 49.2MPH d*** you 0.8 mph trying to find where I put the 8.4 gears...... I have no idea it's kinda upsetting spend $50 on gears and not know where they are.... Thanks guys 7 gram rollers and 9:1 rumia 50mm bore and her name lives sexy beas...

She has ok low end horrible mid and havent gone WOT yet but she takes forever to get anywhere past 35 she slowly creeps to 45 have t held open longer than to get to 45

Thank you, that would be due to my cht gauge that doesn't work plan to buy a new one.... Will take our for now..... And plan to also get a tach!

Looked inside bore back and nasty cleaned and got rid of the thick prob 1/8 inch of carbon cluster nasty groups next to the spark plug cleaned that up and put 7gram rollers in, need to break in a bit till I go wot let u know when I do. And is ther a reason why there was so much carbon build up next ...

Ok sounds good thanks going for max top speed

Ok, thanks for the advice smart * hahahha no offense I'm one too. But thanks for Beeing willing to answer my questions and Beeing pacient with a semi noob in the vari section

I have 2K big spring and 3 2K mini springs in-between clutch parts I will drop to 39mm roller wieghts and try stock belt

So is it bad if the thicker one is the same lenth?

Measured side by side with stock belt there the same lenth and one is only slightly wider

YES!! they are 9:1 I'm positive but the bore trys to speed up and kind surges but then goes back to 45ish..... I have recently upgraded belt to 17mm belt about 100miles ago