Search found 119 matches
- Sun Sep 29, 2019 5:17 pm
- Forum: Technical Help
- Topic: 1987 Honda Elite SE50 Derestricting
- Replies: 20
- Views: 13465
Re: 1987 Honda Elite SE50 Derestricting
Time to finish the second Spree and get the Jog together!
- Sun Sep 29, 2019 4:22 pm
- Forum: Technical Help
- Topic: 1987 Honda Elite SE50 Derestricting
- Replies: 20
- Views: 13465
Re: 1987 Honda Elite SE50 Derestricting
Mods are: Keli variator and speed pulley with 6, 7g weights, 84 main jet, and Technigas pipe. Pretty happy with that.
Next up, 1000 or 1500 clutch springs and contra A.S. required.
Next up, 1000 or 1500 clutch springs and contra A.S. required.
- Sun Sep 29, 2019 4:20 pm
- Forum: Technical Help
- Topic: 1987 Honda Elite SE50 Derestricting
- Replies: 20
- Views: 13465
Re: 1987 Honda Elite SE50 Derestricting
Step 2 completed:
Kelli pulley and variatiator installed, seeing just over 42mph gps!!! Ima at least right where the Elite S is, I did get over 47 downhill crossing the freeway
Kelli pulley and variatiator installed, seeing just over 42mph gps!!! Ima at least right where the Elite S is, I did get over 47 downhill crossing the freeway
- Fri Sep 27, 2019 9:11 pm
- Forum: Technical Help
- Topic: Noiseguy, vacation!!??!
- Replies: 9
- Views: 5549
Re: Noiseguy, vacation!!??!
eclark5483 wrote: ↑Fri Sep 27, 2019 7:06 pm Post office is open on Saturdays, quit making excuses ya beatnik.
- Fri Sep 27, 2019 12:59 pm
- Forum: Technical Help
- Topic: Noiseguy, vacation!!??!
- Replies: 9
- Views: 5549
Re: Noiseguy, vacation!!??!
I'm glad everyone is on-board with my assessment!!!! LOL
- Fri Sep 27, 2019 11:42 am
- Forum: Technical Help
- Topic: Milling Spree Head
- Replies: 17
- Views: 9154
Re: Milling Spree Head
Ok, I'll go that route. I do have SB50 cages as well that I got with the intakes. I will use the known good reeds that are currently on the bike (85') and transfer them to the SB50 cages . Thanks for all the help. As any new addiction, I'm learning the nuances here. I'm fully capable of doing all th...
- Fri Sep 27, 2019 8:37 am
- Forum: Technical Help
- Topic: Milling Spree Head
- Replies: 17
- Views: 9154
Re: Milling Spree Head
Looks like the reeds and gaskets I planned to buy won't be available until noiseguy returns from vacation, anyone know where I can get new reeds and gaskets relatively quickly? I will be tapping the SB50 intakes for the oil line I got tomorrow and would like to get them installed I have the reeds th...
- Thu Sep 26, 2019 9:59 pm
- Forum: Technical Help
- Topic: Milling Spree Head
- Replies: 17
- Views: 9154
Re: Milling Spree Head
Not familiar, those were early 80’s right? Fill me in.
- Thu Sep 26, 2019 9:31 pm
- Forum: Technical Help
- Topic: Noiseguy, vacation!!??!
- Replies: 9
- Views: 5549
- Thu Sep 26, 2019 8:42 pm
- Forum: Technical Help
- Topic: Noiseguy, vacation!!??!
- Replies: 9
- Views: 5549
Noiseguy, vacation!!??!
I need his reeds an gasket off eBay and he has the guts to take a vacation!!!!! Unreal.
- Thu Sep 26, 2019 2:28 pm
- Forum: Technical Help
- Topic: Milling Spree Head
- Replies: 17
- Views: 9154
Re: Milling Spree Head
That's exactly what I am looking for more overall pull to speed, if I get 2-3mph top speed with the milling and the SB50 reeds that would be beyond expectations. That would pull me into the low 40's on level ground on the bike with the speed pulley. When I swap I am changing the springs and have a b...
- Thu Sep 26, 2019 2:24 pm
- Forum: Technical Help
- Topic: 1987 Honda Elite SE50 Derestricting
- Replies: 20
- Views: 13465
Re: 1987 Honda Elite SE50 Derestricting
Yeah, I know how to get to it. I am going to try it stock, then proceed after that, thanks for sharing your experience. If mine does the same I will know which direction to go!
- Thu Sep 26, 2019 7:35 am
- Forum: Technical Help
- Topic: Milling Spree Head
- Replies: 17
- Views: 9154
Re: Milling Spree Head
I agree 100%, the speed pulley is not good for a guy my size, so most likely I’ll end up with one of each, to be honest, I’m betting I end up in the 37’ish range with the work I’m doing and the 13T, MLM, piston, reeds, intake, milling etc., and be more tolerable off the line. Keep in mind the wife a...
- Wed Sep 25, 2019 7:58 pm
- Forum: Technical Help
- Topic: Milling Spree Head
- Replies: 17
- Views: 9154
Re: Milling Spree Head
I’m gonna pin that speedo on flat ground one way or the other
Even if I have to drill out an “intake hole” in the intake side of the piston and up-jet. That’s an OLD one...
Even if I have to drill out an “intake hole” in the intake side of the piston and up-jet. That’s an OLD one...
- Wed Sep 25, 2019 7:56 pm
- Forum: Technical Help
- Topic: Milling Spree Head
- Replies: 17
- Views: 9154
Re: Milling Spree Head
It will be interesting to see how this one runs with the 13 T instead of the speed pulley, SB50 reeds and intake came today, guess we will see how good my tapping skills are to plumb it for oil.