Honda Spree and Elite 50 Forums

aero 50/ 87 elite 50 exhaust should fit on early sa motor (88-93)

those home made tech job,, can damage and add pressure on left crank bearing. just buy cordless impact gun 12v.

jog70cc can spank dio stroker motor anytime

over 70 . 3miles runs no cht gauge!

GOOD FUN! ducking down , big speed wobble!

I was thinking about purchasing the F.M. 85cc Bore Kit & F.M. Stock Replacement Crank. Is there a better combo in the same price range? Also, can these over bore kits be used with the stock carb (with rejetting) and exhaust? that will not work on big bore kit on stock carb , not enough fuel ! ju...

jog crank 50 is 39.2 mm stroke X bore 47mm = 68cc. 10mm pin.

veedub, is it alright to remove that metal piece from the engine mount the way you have in the picture?! if you talking about the tounge that goes into the frame,then No ,you need that to keep the mount from moving to far,that's why we use the mounts from other bikes to keep the mount from going ov...

af16 mount is good. wouldnt need to cut smile/eve subframe .


still need to cut about 1/2 inch tongue and weld the top.

i down for ferry trip.

Kitaco Kevlar ZX Drive Belt $ 35 it wont work on your stock S front pulley, rear clutch shoes,boss and v plates. Check out on his forums diosoljah. ZX trans setup. If you dont have that kind of money to spend on the stroker kit, will need to machine work, crankcase to fit stroker crank and cut top c...

diomike wrote:i got a washer in my pipe for my dio sr it has a 70cc kit do u think i should remove it .will it help???

yes , it will make some different, and need tunes jets and roller weights.

remove a restrictor plate, 3 screws, and face seal on the pulley that hold 6 roller weight. and oil pump cable too.

noiseguy wrote:Isn't the 80 4-stroke?

it is 4 stroke elite 80.

niftyfifty wrote:is it fixable? or do i just buy a new one??

buy new one