Honda Spree and Elite 50 Forums

get a polini adjustable clutch .

in the last 3 weeks theres been niftyfiftys here for sale for so cheap i almost bought 3 off one guy for $150 but i had to hold back as ive got to sell some bikes to make more room.Then just now another gets offered to me for $50 .It would be great if i could just load them up and send the to you gu...

Bigger is not always better .i went all out and open it as much as i could but it made tuning for round town driving very fiddley so i got another case did another port job i opened the ports 2mm higher knife edged the centre brace and both sides of the port windows straight (as they are tappered st...

get a new belt and clean any rust of the drive face and rear pulley

coil wires on the wrong way ?

if everything else is left stock then maybe just 2 sizes up .Get a few jets to play with start at 90 that should be rich and work your way down and do plenty of plug chops as id bet you dont have a temp guage .

use the bolt hole for the original pump and bolt a little plate over it to stop it coming out .Also a little hondabond around the plug befor install helps stop air leaks

any good clutch or brake shop should be able to reline them cheap .

i try to work smarter not harder .

he may well have deleted everything for insurence reasons .They may not pay out if they knew he had pics on the net of his bikes .

you need the clearence of the gasket .Your gears will bind up with just sealer .

im sorry G9 but i hate the finger on the hole idea 20psi will blow past your finger but it aint gonna run with 20psi .No disrespect G9 but i think its better to Hire/Buy/Borrow a good compression tester .

All of his posts on everything has been deleted and his user name does not exist anymore . * . This guy was great .

lol outlaws .

stock honda cdi is the best unless you buy the malossi .Dont buy any other "racing cdi's" from ebay they are crap .