78cc nicasil bore
Moderator: Moderator
-
- Goped
- Posts: 80
- Joined: Thu May 06, 2010 11:56 pm
- Location: manistee
78cc nicasil bore
since my 82cc tawinese bore is trashed i decided to go with the aluminum 49mm 78cc nicasil bore thoughts on it and opinions!
Re: 78cc nicasil bore
i was told they don't last long- 5,000 mi. but reliable.
some people dream of speed, i own your dreams!
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: 78cc nicasil bore
That would be about 10x longer than your 82ccmaddog wrote:i was told they don't last long- 5,000 mi. but reliable.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
-
- Goped
- Posts: 80
- Joined: Thu May 06, 2010 11:56 pm
- Location: manistee
Re: 78cc nicasil bore
lol right see what happens next
-
- CBR1000RR
- Posts: 4219
- Joined: Thu Mar 05, 2009 9:02 pm
- Location: Iowa, USA
Re: 78cc nicasil bore
Did you prep your Taiwanese bore? I don't think you have to prep the KJT Nikasil bore, it is a true bolt on.tospreeornottospree wrote:since my 82cc tawinese bore is trashed i decided to go with the aluminum 49mm 78cc nicasil bore thoughts on it and opinions!
motormike wrote:Errands become adventures.
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: 78cc nicasil bore
What do you mean "prep" the bore?eliteguy50 wrote:Did you prep your Taiwanese bore? I don't think you have to prep the KJT Nikasil bore, it is a true bolt on.tospreeornottospree wrote:since my 82cc tawinese bore is trashed i decided to go with the aluminum 49mm 78cc nicasil bore thoughts on it and opinions!
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
-
- CBR1000RR
- Posts: 4219
- Joined: Thu Mar 05, 2009 9:02 pm
- Location: Iowa, USA
Re: 78cc nicasil bore
Clean it up. It may fit well enough to bolt right on but most of the Taiwan kits need the installer to check for burs and clean up any casting material on the flange. Chamfer the ports.Trafficjamz wrote:What do you mean "prep" the bore?eliteguy50 wrote:Did you prep your Taiwanese bore? I don't think you have to prep the KJT Nikasil bore, it is a true bolt on.tospreeornottospree wrote:since my 82cc tawinese bore is trashed i decided to go with the aluminum 49mm 78cc nicasil bore thoughts on it and opinions!
motormike wrote:Errands become adventures.
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: 78cc nicasil bore
It was a wrist pin clip that came loose that killed the Taiwan bore
The bore was cleaned up
The bore was cleaned up
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
-
- CBR1000RR
- Posts: 4219
- Joined: Thu Mar 05, 2009 9:02 pm
- Location: Iowa, USA
Re: 78cc nicasil bore
Oh, time to ceramic coat the next one.Trafficjamz wrote:It was a wrist pin clip that came loose that killed the Taiwan bore
The bore was cleaned up
motormike wrote:Errands become adventures.