What ratio are these?
Moderator: Moderator
- KingJeff801
- Board Supporter
- Posts: 782
- Joined: Mon Jun 14, 2010 9:16 pm
- Location: S.L.UT
What ratio are these?
http://cgi.ebay.com/ebaymotors/ws/eBayI ... MEWAX%3AIT
Seller didn't seem to really know, Will they fit an AF16?
Seller didn't seem to really know, Will they fit an AF16?
2001 Elite S
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
Re: What ratio are these?
what was the tooth count on the ring and the pinion
Re: What ratio are these?
Assuming the seller's info is correct, yes they fit a AF16 motor, the final ratio would be around 9.2:1
In 2040 they say we're going away
We could never let them control
Hawaiian man, take back your hawaiian land
We could never let them control
Hawaiian man, take back your hawaiian land
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: What ratio are these?
Greetings:
If you can do a little Math and you know your current primaries...
Integral Clutch Shaft Gear = "A"
Big Countershaft Gear (splined) = "B"
Integral Small Counter Gear = "C"
Axle Shaft Gear (pressed-on) = D
The Formula is: B/A x D/C.
42/12 x 40/15 = 9.33:1
Alternatively, you can look Here. The Thread is in Technical Documents and (Methinks...) WikiSpreedia.
If you can do a little Math and you know your current primaries...
Integral Clutch Shaft Gear = "A"
Big Countershaft Gear (splined) = "B"
Integral Small Counter Gear = "C"
Axle Shaft Gear (pressed-on) = D
The Formula is: B/A x D/C.
42/12 x 40/15 = 9.33:1
Alternatively, you can look Here. The Thread is in Technical Documents and (Methinks...) WikiSpreedia.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: What ratio are these?
Wheelman-111 wrote:Greetings:
If you can do a little Math and you know your current primaries...
Integral Clutch Shaft Gear = "A"
Big Countershaft Gear (splined) = "B"
Integral Small Counter Gear = "C"
Axle Shaft Gear (pressed-on) = D
The Formula is: B/A x D/C.
42/12 x 40/15 = 9.33:1
Alternatively, you can look Here. The Thread is in Technical Documents and (Methinks...) WikiSpreedia.
Yeah but these are primary gears....not secondaries.
9.23:1 is the ratio if the tooth count is right, and you have stock secondaries.
Last edited by Trafficjamz on Fri Mar 18, 2011 12:51 pm, edited 1 time in total.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: What ratio are these?
Greetings:
Good catch, Jamz! I didn't get a good look at the parts/package on my BB.
Good catch, Jamz! I didn't get a good look at the parts/package on my BB.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
- KingJeff801
- Board Supporter
- Posts: 782
- Joined: Mon Jun 14, 2010 9:16 pm
- Location: S.L.UT
Re: What ratio are these?
Thanks for the input fellas! I wasn't quite sure the formula for primary gears, I took a gamble buying them and figured since they were Daytona they had to be worth something. These should work well on my stock bike!
Thanks, again
Thanks, again
Last edited by KingJeff801 on Fri Mar 18, 2011 1:09 pm, edited 1 time in total.
2001 Elite S
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
Re: What ratio are these?
Dude, you fuggin' SCORED!!!KingJeff801 wrote:Thanks for the input fellas! I wasn't qutie sure the formula for primary gears, I took a gamble buying them and figured since they were Daytona they had to be worth something. These should work well on my stock bike!
Thanks, again
- KingJeff801
- Board Supporter
- Posts: 782
- Joined: Mon Jun 14, 2010 9:16 pm
- Location: S.L.UT
Re: What ratio are these?
sanjuro wrote:Dude, you fuggin' SCORED!!!KingJeff801 wrote:Thanks for the input fellas! I wasn't qutie sure the formula for primary gears, I took a gamble buying them and figured since they were Daytona they had to be worth something. These should work well on my stock bike!
Thanks, again
Daytona parts are pretty rare these days , much less new ones! I didn't want to ask before the bidding eneded or these would have gone for a lot more
2001 Elite S
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
Re: What ratio are these?
If you want to make some money on these, I'll give you $90.KingJeff801 wrote:sanjuro wrote:Dude, you fuggin' SCORED!!!KingJeff801 wrote:Thanks for the input fellas! I wasn't qutie sure the formula for primary gears, I took a gamble buying them and figured since they were Daytona they had to be worth something. These should work well on my stock bike!
Thanks, again
Daytona parts are pretty rare these days , much less new ones! I didn't want to ask before the bidding eneded or these would have gone for a lot more
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: What ratio are these?
The package says 10% up
10% up from 12.1:1 is 10.89:1
The only way to know for sure, is to count the teeth, when you get them.
10% up from 12.1:1 is 10.89:1
The only way to know for sure, is to count the teeth, when you get them.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
- KingJeff801
- Board Supporter
- Posts: 782
- Joined: Mon Jun 14, 2010 9:16 pm
- Location: S.L.UT
Re: What ratio are these?
Trafficjamz wrote:The package says 10% up
10% up from 12.1:1 is 10.89:1
The only way to know for sure, is to count the teeth, when you get them.
I will give them a count when gears arrive, do the bikes in japan come stock with 12.1:1 gears?
Last edited by KingJeff801 on Fri Mar 18, 2011 1:11 pm, edited 1 time in total.
2001 Elite S
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
- KingJeff801
- Board Supporter
- Posts: 782
- Joined: Mon Jun 14, 2010 9:16 pm
- Location: S.L.UT
Re: What ratio are these?
[/quote]Daytona parts are pretty rare these days , much less new ones! I didn't want to ask before the bidding eneded or these would have gone for a lot more [/quote]
If you want to make some money on these, I'll give you $90.[/quote]
I will give it some thought , Thanks for the offer
If you want to make some money on these, I'll give you $90.[/quote]
I will give it some thought , Thanks for the offer
2001 Elite S
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
Re: What ratio are these?
Baseline Dios (non-ZX models) come with 12.11:1 gears.KingJeff801 wrote:I will give them a count when gears arrive, do the bikes in japan come stock with 12.1:1 gears?Trafficjamz wrote:The package says 10% up
10% up from 12.1:1 is 10.89:1
The only way to know for sure, is to count the teeth, when you get them.
The ZX models are 10.91:1.
- KingJeff801
- Board Supporter
- Posts: 782
- Joined: Mon Jun 14, 2010 9:16 pm
- Location: S.L.UT
Re: What ratio are these?
The package says DIO ZX so I wonder if its 10% up from 10.91:1?sanjuro wrote:Baseline Dios (non-ZX models) come with 12.11:1 gears.KingJeff801 wrote:I will give them a count when gears arrive, do the bikes in japan come stock with 12.1:1 gears?Trafficjamz wrote:The package says 10% up
10% up from 12.1:1 is 10.89:1
The only way to know for sure, is to count the teeth, when you get them.
The ZX models are 10.91:1.
2001 Elite S
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life