Class laser-cut Project
Moderator: Moderator
Class laser-cut Project
We had a major cutting project for my Industrial Lasers class so I decided to make a cool HONDA logo nameplate. Went through drawing it out in AutoCAD2010 and then cut it out on our big laser cutter. I made one with red acrylic and one with black and just swapped out the "inner" pieces for a sweet look. I still have to glue them in place (they are only taped on the backside) but I think it turned out pretty neat.
2006 Sachs Madass
- FTP 140cc Kit
- Stock 125cc undertail exhaust
2006 Xkeleton Trickster
- Lifan 90cc auto
- FTP 140cc Kit
- Stock 125cc undertail exhaust
2006 Xkeleton Trickster
- Lifan 90cc auto
- fightingplankton
- CB900F
- Posts: 1119
- Joined: Wed Oct 28, 2009 8:57 pm
- Location: Yakima, Wa
Re: Class laser-cut Project
Impressive......would look so fine backlit and hangin' in my shop........better than neon...
RideRed
<(2)Gyro S><Helix><Sym Wolf>
"Live Large - Ride Small"
<(2)Gyro S><Helix><Sym Wolf>
"Live Large - Ride Small"
- z50r-ghost
- CB900F
- Posts: 1191
- Joined: Fri Sep 12, 2008 3:46 am
- Location: blank
Re: Class laser-cut Project
Man.... I graduated high school in 1997, and we never had anything but drafting, CNC, and graphic design. I wished we had laser cutter teaching when I was in school! That would have been a really fun and beneficial class!!
j
j
.locked away in a cage my rage has got the best of me
time finds a way each day of leaving less of me behind.
>< Solitaire Unraveling ><
http://www.youtube.com/watch?v=U45NfWSX-Vk
...my life story
1990HONDANS50F
********************
time finds a way each day of leaving less of me behind.
>< Solitaire Unraveling ><
http://www.youtube.com/watch?v=U45NfWSX-Vk
...my life story
1990HONDANS50F
********************
- KingJeff801
- Board Supporter
- Posts: 782
- Joined: Mon Jun 14, 2010 9:16 pm
- Location: S.L.UT
Re: Class laser-cut Project
I still would have found a way to make a bong with itz50r-ghost wrote:Man.... I graduated high school in 1997, and we never had anything but drafting, CNC, and graphic design. I wished we had laser cutter teaching when I was in school! That would have been a really fun and beneficial class!!
j
2001 Elite S
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
- spree-rider
- Elite
- Posts: 693
- Joined: Tue Nov 03, 2009 8:24 pm
- Location: Burien, WA
Re: Class laser-cut Project
oh yes. we just recently got a laser cutter @ my school and j=i just finished setting up and testing. pretty cool!KingJeff801 wrote:I still would have found a way to make a bong with itz50r-ghost wrote:Man.... I graduated high school in 1997, and we never had anything but drafting, CNC, and graphic design. I wished we had laser cutter teaching when I was in school! That would have been a really fun and beneficial class!!
j
86 spree
sb 50 intake and reeds
3.00x10 rear tire
waxed
99Polaris indy 700
harliquim paint
2" bar riser
lefty throttle
ice scratchers
SLP tri keel skis
ported
high compression head
chrome low windshield
mountain bar
Xtra-10
I ALWAYS KEEP ONE ROLLED
sb 50 intake and reeds
3.00x10 rear tire
waxed
99Polaris indy 700
harliquim paint
2" bar riser
lefty throttle
ice scratchers
SLP tri keel skis
ported
high compression head
chrome low windshield
mountain bar
Xtra-10
I ALWAYS KEEP ONE ROLLED
- Petrock's 1984 Spree
- Elite
- Posts: 768
- Joined: Wed Dec 01, 2010 10:20 pm
- Location: Iowa
Re: Class laser-cut Project
Wow those look great!
And i thought our CNC was cutting edge. I heard from my instructor that in '04 our high school was still pulling metal out of forges and beating on it with chisels
Crazy stuff!
And i thought our CNC was cutting edge. I heard from my instructor that in '04 our high school was still pulling metal out of forges and beating on it with chisels
Crazy stuff!
Complete NOOB, sorry dudes
1984 Iowa Spreedio aka "Hammy"
-72cc Polini Corsa
-V8 Typhoon Exhaust
-21mm OKO & CT Mani
-ZX Trans 1k Contra
-8.44:1 Gears
-Polini 2 Shoe Clutch
-Koso Vented Clutch Bell
-Polini Ruckus Vari w/ 6.9g weights
-669x18x30 Belt
1984 Iowa Spreedio aka "Hammy"
-72cc Polini Corsa
-V8 Typhoon Exhaust
-21mm OKO & CT Mani
-ZX Trans 1k Contra
-8.44:1 Gears
-Polini 2 Shoe Clutch
-Koso Vented Clutch Bell
-Polini Ruckus Vari w/ 6.9g weights
-669x18x30 Belt
-
- Veteran OG
- Posts: 3639
- Joined: Tue May 22, 2007 8:10 pm
- Location: North of Seattle, WA
Re: Class laser-cut Project
Those look good!
What's the kerf size and what's the capacity of the machine?
What's the kerf size and what's the capacity of the machine?
Re: Class laser-cut Project
Thanks everyone, I'll try and get some finished product pictures tomorrow.mousewheels wrote:Those look good!
What's the kerf size and what's the capacity of the machine?
It is a CO2 laser with an 18" x 18" travel bed. I believe the kerf is about 1/16"
2006 Sachs Madass
- FTP 140cc Kit
- Stock 125cc undertail exhaust
2006 Xkeleton Trickster
- Lifan 90cc auto
- FTP 140cc Kit
- Stock 125cc undertail exhaust
2006 Xkeleton Trickster
- Lifan 90cc auto
- burnt_toast
- Veteran OG
- Posts: 3592
- Joined: Sat Jul 31, 2004 8:00 pm
- Location: Atlanta, GA
Re: Class laser-cut Project
looks awesome
and dude you still have dibs on those skirts, im almost there, finally cleaned up garage.. sry its taking so long
and dude you still have dibs on those skirts, im almost there, finally cleaned up garage.. sry its taking so long
projects galore
Re: Class laser-cut Project
Excellent! Was starting to worry you had forgotten again. lolburnt_toast wrote: and dude you still have dibs on those skirts, im almost there, finally cleaned up garage.. sry its taking so long
2006 Sachs Madass
- FTP 140cc Kit
- Stock 125cc undertail exhaust
2006 Xkeleton Trickster
- Lifan 90cc auto
- FTP 140cc Kit
- Stock 125cc undertail exhaust
2006 Xkeleton Trickster
- Lifan 90cc auto
-
- Veteran OG
- Posts: 3639
- Joined: Tue May 22, 2007 8:10 pm
- Location: North of Seattle, WA
Re: Class laser-cut Project
Huh - 18 x 18? Hope you have continued access and post some more projects. How about some gaskets?
-- thanks!
-- thanks!