Please re-read your post and amend to make sense...gyromaniac wrote:does anyone know if the gyro uses the same throttle cable as the gyro. mine just snapped.
Gyro - general thread
Moderator: Moderator
Re: Gyro - general thread
RideRed
<(2)Gyro S><Helix><Sym Wolf>
"Live Large - Ride Small"
<(2)Gyro S><Helix><Sym Wolf>
"Live Large - Ride Small"
-
- Veteran OG
- Posts: 3639
- Joined: Tue May 22, 2007 8:10 pm
- Location: North of Seattle, WA
Re: Gyro - general thread
If asking about cross between TG50 and NN50 parts, sorry- the NN50 tucks the cable splitter box up under the front leg sheild.gyromaniac wrote:does anyone know if the gyro uses the same throttle cable as the gyro. mine just snapped.
Throttle and oil cables are not a problem to fab up. I've built up an oil cable and a throttle cable. Other members have too.
- gyromaniac
- Spree
- Posts: 230
- Joined: Mon Jul 25, 2011 12:27 am
- Location: richmond
Re: Gyro - general thread
sorry, brain lapse there. i meant to say, does the gyro use the same throttle cable as any other scooters?
Re: Gyro - general thread
Just to let you know, I bought a cable that said it was for a gyro, but the housing was too short. Measure yours, the full length of the cable, the length of the housing and anything else you can measure. Last I looked the dimensions aren't in the Gyro wiki. I found several suppliers of chinese scooter parts had a pretty large collection of cables. Maybe one will fit.
Re: Gyro - general thread
Well I went to some vintage bike nite ...
I had the only Honda Gyro well actually I had the only scooter
it was like a * of Harleys and only a few vintage ones at that .
I did watch some chick get body painted .... big deal ?
I was hopeing for a biker fight but it seemed very tame .
Oh well off to another bar ....
I had the only Honda Gyro well actually I had the only scooter
it was like a * of Harleys and only a few vintage ones at that .
I did watch some chick get body painted .... big deal ?
I was hopeing for a biker fight but it seemed very tame .
Oh well off to another bar ....
- Attachments
-
- I don't think so .
- 100_2327.jpg (81.17 KiB) Viewed 4298 times
-
- Born to be wild ... I should be dead right now .
- 100_2324.jpg (56.36 KiB) Viewed 4298 times
-
- 1 chick whats up with that ?
They couldnt round up a few more ? - 100_2323.jpg (59.9 KiB) Viewed 4298 times
- 1 chick whats up with that ?
- tazland001
- Board Supporter
- Posts: 1333
- Joined: Thu Apr 30, 2009 11:46 pm
Re: Gyro - general thread
Yummy.
- gyromaniac
- Spree
- Posts: 230
- Joined: Mon Jul 25, 2011 12:27 am
- Location: richmond
Re: Gyro - general thread
well i broke my throttle cable a few days ago. just got my new one in. local honda shop built me a completly new one. for $56.10......dang
Re: Gyro - general thread
Hello Gyromaniacgyromaniac wrote:well i broke my throttle cable a few days ago. just got my new one in. local honda shop built me a completly new one. for $56.10......dang
I know what your going through .
I had an 85 Aero that had a split cable the housing was round ,but matched up to my Gyro perfectly .
It was a while ago I think I had to do some mods but it works great , now the only problem you will have is trying to find an 85 Aero 50 cable (split )
I also found a place Scrappydogs that sells split cables again I have made them work it just takes some mods.
Here are some pics.
Please if you try this do it at your own risk ... you will have to do some mods
The cables are also not the right size they are longer a lot better than too short .
Again do this at your own risk ...
- Attachments
-
- part #2 the split cable throttle / oil
Honda this will work .... - Screen shot 2012-07-22 at 3.20.12 AM.jpg (66.41 KiB) Viewed 4708 times
- part #2 the split cable throttle / oil
-
- Be careful these are china cables but I have made them work .
Better than nothing ... - Screen shot 2012-07-22 at 3.25.35 AM.jpg (60.53 KiB) Viewed 4708 times
- Be careful these are china cables but I have made them work .
-
- More China cables .
- Screen shot 2012-07-22 at 3.26.52 AM.jpg (29.2 KiB) Viewed 4708 times
-
- Veteran OG
- Posts: 3639
- Joined: Tue May 22, 2007 8:10 pm
- Location: North of Seattle, WA
Re: Gyro - general thread
Good info to investigate on cables 66Six. I've been meaning to measure the TG50 throttle cable for the 'wiki, but have not torn into one that far for too long...
There's a TG50 carb cover on eBay right now. I am not planning to be in on the pool. Jump in, snipe or just watch, part like this is always interesting - Link to Carb cover
There's a TG50 carb cover on eBay right now. I am not planning to be in on the pool. Jump in, snipe or just watch, part like this is always interesting - Link to Carb cover
- gyromaniac
- Spree
- Posts: 230
- Joined: Mon Jul 25, 2011 12:27 am
- Location: richmond
Re: Gyro - general thread
i have a serious problem. my gyro wont start and i dont know why. i have tried everything. i was riding down the street, and i heard a loud pop. i thought it was a backfire. but when i throttled up i had no power. it still ran but i no power. and now it wont start. i dont know if i blew a ring or something. any help is appreciated.
- gyromaniac
- Spree
- Posts: 230
- Joined: Mon Jul 25, 2011 12:27 am
- Location: richmond
Re: Gyro - general thread
HELP WITH PISTON
I need a new piston cause mine just got ruined. my piston ring broke and it scared my piston pretty badly. If anyone has one they would like to sell, please PM me about it. If there are alternatives or after market pistons i can use, please tell. thanks
I need a new piston cause mine just got ruined. my piston ring broke and it scared my piston pretty badly. If anyone has one they would like to sell, please PM me about it. If there are alternatives or after market pistons i can use, please tell. thanks
-
- Veteran OG
- Posts: 3639
- Joined: Tue May 22, 2007 8:10 pm
- Location: North of Seattle, WA
Re: Gyro - general thread
No problem finding an alternate piston for the TG50. Buy a new one Check out the Gyro wiki topic at this linkI need a new piston cause mine just got ruined. my piston ring broke and it scared my piston pretty badly. If anyone has one they would like to sell, please PM me about it. If there are alternatives or after market pistons i can use, please tel
- gyromaniac
- Spree
- Posts: 230
- Joined: Mon Jul 25, 2011 12:27 am
- Location: richmond
Re: Gyro - general thread
are any of these pistons dished like the gyro's piston? also will the fact that some are oversized make a difference, like, will i have to do any modification the the jug like overbore?
-
- Veteran OG
- Posts: 3639
- Joined: Tue May 22, 2007 8:10 pm
- Location: North of Seattle, WA
Re: Gyro - general thread
If you are bent on having a dished piston, 84/85 Spree are dished. I've had no issues with the dome head on the two I've done.gyromaniac wrote:are any of these pistons dished like the gyro's piston? also will the fact that some are oversized make a difference, like, will i have to do any modification the the jug like overbore?
0versize 0.25 and 0.5 piston/rings are for when your cyl is damaged or worn past stock size and will require cylinder machine work.
- gyromaniac
- Spree
- Posts: 230
- Joined: Mon Jul 25, 2011 12:27 am
- Location: richmond
Re: Gyro - general thread
Has anyone ever thought of reproducing the carb cover and selling them?