How to remove paint from scooter panel
Moderator: Moderator
- steffen707
- Elite
- Posts: 916
- Joined: Wed Aug 13, 2008 12:41 am
- Location: Central, WI
How to remove paint from scooter panel
If you buy a scooter and somebody painted a dumb graphic on the side panel, is there an easy way to take it off without hurting the original finish below? Are spree and elite panels the same color through the plastic, or are they still painted on top, and if you sand or chemically strip the paint on the top layer, going to be just bare plastic underneath?
I bought a panel off ebay, and the seller neglected to mention pink overspray all over the piece, funny how their picture was only of the good side.
I bought a panel off ebay, and the seller neglected to mention pink overspray all over the piece, funny how their picture was only of the good side.
87 Honda Spree,
XX Yamaha YSR50
92 Yamaha Jog -> Stock.
05 Kymco Super 9-> My cruiser
xx Honda Gyro -> Man I gotta fix that.
98 Honda Elite S -> corsa, pg long, 24mm oko, ct chrome, ZX trans w/ ruckus variator, trailtech vapor gauges
XX Yamaha YSR50
92 Yamaha Jog -> Stock.
05 Kymco Super 9-> My cruiser
xx Honda Gyro -> Man I gotta fix that.
98 Honda Elite S -> corsa, pg long, 24mm oko, ct chrome, ZX trans w/ ruckus variator, trailtech vapor gauges
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: How to remove paint from scooter panel
Greetings:
The plastic is tinted, but sanding or stripping the outer surface gloss will definitely leave a mark. Consider Wet sand with 400 or 600 just enough to remove unsightly pink. If it leaves a dull spot -AND you didn't remove too much surface pigment - you might get away with a shot of clear to restore the luster.
The plastic is tinted, but sanding or stripping the outer surface gloss will definitely leave a mark. Consider Wet sand with 400 or 600 just enough to remove unsightly pink. If it leaves a dull spot -AND you didn't remove too much surface pigment - you might get away with a shot of clear to restore the luster.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
- steffen707
- Elite
- Posts: 916
- Joined: Wed Aug 13, 2008 12:41 am
- Location: Central, WI
Re: How to remove paint from scooter panel
Thanks wheelman, I'll give that a shot. I thought you were suppose to wet sand with like 1000grit?
87 Honda Spree,
XX Yamaha YSR50
92 Yamaha Jog -> Stock.
05 Kymco Super 9-> My cruiser
xx Honda Gyro -> Man I gotta fix that.
98 Honda Elite S -> corsa, pg long, 24mm oko, ct chrome, ZX trans w/ ruckus variator, trailtech vapor gauges
XX Yamaha YSR50
92 Yamaha Jog -> Stock.
05 Kymco Super 9-> My cruiser
xx Honda Gyro -> Man I gotta fix that.
98 Honda Elite S -> corsa, pg long, 24mm oko, ct chrome, ZX trans w/ ruckus variator, trailtech vapor gauges
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: How to remove paint from scooter panel
Greetings:
Wheelman is much too impatient to sand that long. (Probably accounts for some of my painting "skill" outcomes...) Yeah, 1000 is probably safer and leaves a shiny surface, but takes forever. You do have to keep rinsing to checking the color. Once the paper turns to body color instead of mostly Pink, slow down.
Wheelman is much too impatient to sand that long. (Probably accounts for some of my painting "skill" outcomes...) Yeah, 1000 is probably safer and leaves a shiny surface, but takes forever. You do have to keep rinsing to checking the color. Once the paper turns to body color instead of mostly Pink, slow down.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
- steffen707
- Elite
- Posts: 916
- Joined: Wed Aug 13, 2008 12:41 am
- Location: Central, WI
Re: How to remove paint from scooter panel
Maybe I can just put a chair in the shower and go to town on it, then I don't have rinse, it'll just be constant flow. Do people wet sand in a tub of water? That would work too, never have to worry about burning the material.
87 Honda Spree,
XX Yamaha YSR50
92 Yamaha Jog -> Stock.
05 Kymco Super 9-> My cruiser
xx Honda Gyro -> Man I gotta fix that.
98 Honda Elite S -> corsa, pg long, 24mm oko, ct chrome, ZX trans w/ ruckus variator, trailtech vapor gauges
XX Yamaha YSR50
92 Yamaha Jog -> Stock.
05 Kymco Super 9-> My cruiser
xx Honda Gyro -> Man I gotta fix that.
98 Honda Elite S -> corsa, pg long, 24mm oko, ct chrome, ZX trans w/ ruckus variator, trailtech vapor gauges
Re: How to remove paint from scooter panel
ha ha, thats how i paint my panels a wet shower has zero dust
some people dream of speed, i own your dreams!
Re: How to remove paint from scooter panel
I've had pretty good luck with rubbing compound to get off overspray. Don't use a buffer, use your hand to rub the compound.
- steffen707
- Elite
- Posts: 916
- Joined: Wed Aug 13, 2008 12:41 am
- Location: Central, WI
Re: How to remove paint from scooter panel
I'll try the rubbing compound first, then the wet sanding. Probably won't get around to this for a while as i've got other projects with priority.
87 Honda Spree,
XX Yamaha YSR50
92 Yamaha Jog -> Stock.
05 Kymco Super 9-> My cruiser
xx Honda Gyro -> Man I gotta fix that.
98 Honda Elite S -> corsa, pg long, 24mm oko, ct chrome, ZX trans w/ ruckus variator, trailtech vapor gauges
XX Yamaha YSR50
92 Yamaha Jog -> Stock.
05 Kymco Super 9-> My cruiser
xx Honda Gyro -> Man I gotta fix that.
98 Honda Elite S -> corsa, pg long, 24mm oko, ct chrome, ZX trans w/ ruckus variator, trailtech vapor gauges
- patthesoundguy
- Moderator
- Posts: 3159
- Joined: Mon Mar 29, 2010 11:38 am
- Location: Nova Scotia, Canada
- Contact:
Re: How to remove paint from scooter panel
OK... I love the idea of wet sanding in the shower super awesome!
Sent from my Nexus 7 using Tapatalk 2
Sent from my Nexus 7 using Tapatalk 2
Dude! Ya Can't Fix Stupid!
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
- paulpauly7
- CB900F
- Posts: 1945
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: How to remove paint from scooter panel
mothers clay block is what i use for overspray or a machine buff
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250