I searched but couldn't find how to take off the cover to change the headlight bulb, can y'all point me in the right direction.
Could it be the philips screws on the side or the nuts that you can see thru the side?
Thanks,
roadcapDen
Headlight removal
Moderator: Moderator
-
- Goped
- Posts: 96
- Joined: Mon Jul 10, 2006 4:44 pm
- Location: ON, CDA
- Contact:
i think he just wants to remove the whole light unit, not the bulb. iirc, there are two phillips underneath going into the cover that houses the speedo, then there are two tens on the sides. that's from memory, so don't rip it apart if that doesn't do it, there might be two more bolts/screws.
1980 motobecane sebring : 1989 razz : 1985 spree : 1987 spree : 1986 spree : 2002 yamaha vino :1971 cb100 : 1998 civic : 2002 s2000
-
- Goped
- Posts: 96
- Joined: Mon Jul 10, 2006 4:44 pm
- Location: ON, CDA
- Contact:
re headlight removal
Thanks Mikes,
Is it a sealed unit or can you just replace the bulb.
Still can't figure out how to take it off, the 2 screws on the side just keep turning w/o loosening.
roadcapDen
Is it a sealed unit or can you just replace the bulb.
Still can't figure out how to take it off, the 2 screws on the side just keep turning w/o loosening.
roadcapDen
-
- Goped
- Posts: 96
- Joined: Mon Jul 10, 2006 4:44 pm
- Location: ON, CDA
- Contact:
re Headlight removal
good, I can take it out! wonder how??
roadcapDen
2 Harleys
4 Mopeds
1 Vespa 1 Spree 1 Beluga
2 Harleys
4 Mopeds
1 Vespa 1 Spree 1 Beluga