Repare plastic body !?
Moderator: Moderator
- vermi
- Noob
- Posts: 13
- Joined: Mon Jul 23, 1973 10:24 am
- Location: Maple Grove (Quebec, Canada)
- Contact:
Repare plastic body !?
What are you doing when a plastic body is broke in 2?
Do you use special glue or something else to repare the plastic?
Thank's!
Do you use special glue or something else to repare the plastic?
Thank's!
- hondaspree84
- Noob
- Posts: 9
- Joined: Sat Jul 31, 2004 8:00 pm
What about the below???
http://www.solder-it.com/solderpaste.asp
Solder-It Plastic Weld (PP-1, PP-2)
Solder-It Plastic Weld is the most recent addition to our paste line. Plastic Weld will bond most plastics using the heat of a torch or heat gun including:
Vinyl
Polypropylene
Fiberglass
Thermoset and similar
Lexan
ABS
Polyethylene
Polyurethane
Nylon
Delrin
Acetate
Styrene
PVC
Plastic Weld will activate at approximately 195F and is easily applied from the syringe. You simply vee the joint, deposit the paste and heat. In 5 minutes, the bond reaches 80% of its strength and can be sanded, drilled, tapped, tapered, painted. After 12 hours it is 100% cured. Plastic Weld is available in two designer colors... Black and White.
Some common uses of Plastic Weld include repairs to ABS radiator tanks, overflow reservoir tanks, fan shrouds, bumper covers, grilles, fender skirts, PVC swimming pool lines, baths, PVC sprinkler systems, kitchen repairs.
Plastic Weld $8.00
http://www.solder-it.com/solderpaste.asp
Solder-It Plastic Weld (PP-1, PP-2)
Solder-It Plastic Weld is the most recent addition to our paste line. Plastic Weld will bond most plastics using the heat of a torch or heat gun including:
Vinyl
Polypropylene
Fiberglass
Thermoset and similar
Lexan
ABS
Polyethylene
Polyurethane
Nylon
Delrin
Acetate
Styrene
PVC
Plastic Weld will activate at approximately 195F and is easily applied from the syringe. You simply vee the joint, deposit the paste and heat. In 5 minutes, the bond reaches 80% of its strength and can be sanded, drilled, tapped, tapered, painted. After 12 hours it is 100% cured. Plastic Weld is available in two designer colors... Black and White.
Some common uses of Plastic Weld include repairs to ABS radiator tanks, overflow reservoir tanks, fan shrouds, bumper covers, grilles, fender skirts, PVC swimming pool lines, baths, PVC sprinkler systems, kitchen repairs.
Plastic Weld $8.00
Just to clarify; you stuck a body panel that was broken in half (not just cracked) back together with Bondo?darat wrote:The bondo is working great so to all of u
There are two types of plastic on the Spree. One is thermoplastic. Feels like tupperware. You can heat-weld this stuff up. You can also rebend it using a heat gun. Fibreglass works on this stuff too.
The other looks like SMC. It's harder. The seat body sides are made of this. You can't heat weld this stuff. Epoxy and fibreglass only.