Clicker for the turn signals?

Scooterspal · Post by **Scooterspal** » Thu Jun 05, 2008 9:37 am

The turn signal has no audible sound to it and I'd like to add one. I can wire up a simple buzzer from Radio Shack but some type of clicker would be ideal.

Was there a kit for this or a third party source someone can recommend?

Thanks

dr.ona · Post by **dr.ona** » Thu Jun 05, 2008 9:47 am

I had a blinker relay go out. I bought an aftermarket car blinker relay from NAPA for about $3 bucks. The clicking is loud. I would try that first.

Robert

Curly · Post by **Curly** » Tue Jun 10, 2008 12:59 pm

The old VW bug flashers were loud as *, you could try that.
-Curly

Scooterspal · Post by **Scooterspal** » Tue Jun 10, 2008 4:08 pm

I now know why I cannot hear the flasher even though it is clicking. The darn thing is in the back under the seat... near the motor or all places.

CharlotteSpreeRider · Post by **CharlotteSpreeRider** » Tue Jun 10, 2008 4:11 pm

In the 1987 Spree it got moved right behind the headlight.

-aseigler

Scooterspal · Post by **Scooterspal** » Tue Jun 10, 2008 4:45 pm

Well, I'd probably here it there. Makes sense to be up front. I can probably wire up something to do the trick. Just a small beeper across the indicator lamp on the panel should work.

Clivester · Post by **Clivester** » Thu Jun 12, 2008 12:56 pm

You may find this link useful. Its meant for chinese scooters, but the principles are the same:

http://www.oregonvintage.com/Buzzers.pdf

Clive

mopedman · Post by **mopedman** » Thu Jun 12, 2008 2:12 pm

hey that might actaly work, personally i don't use turn signals i use hand signals