This is what $370 in parts looks like.
Moderator: Moderator
This is what $370 in parts looks like.
And I didn't get the high speed pulley like I thought I ordered. =(
Get the pulley. Try this on Ebay http://cgi.ebay.com/ebaymotors/KOSO-SPE ... 0249657415 The rollers are 5 grams instead of 3 and it has 8 rollers instead of 6. Seller also explains what pulley does, I hear it is probably the best "first" upgrade to do. If you have the big bore kit, get the pulley. Oh yeah...I paid $60.00 for mine so you can see it's a good deal.
It is a V8 muffler which I sell, NParks was lucky and got the last one.
VTCycles.com for performance parts.
Stock it gives higher speed..by about 5 mph and the acceleration stays the same.nparks wrote:Is the highspeed pulley necessary for higher speeds or faster accel.? Or can I live without it with a 75cc bore kit?
Probably increases speeds and acceleration (once at higher speeds) since it gives higher speed it gives better acceleration where it used to slow down(atleast with a stock bike)
Honda Elite SA50-S
Stock motor, 9:1 gears, Kelli High speed pulley=a top speed of ?? Maxed the speedo out if that counts..average 45 mph
average 85 mpg
Stock motor, 9:1 gears, Kelli High speed pulley=a top speed of ?? Maxed the speedo out if that counts..average 45 mph
average 85 mpg
Hey Keoni, i'm the one who got the Keli Racing Company high speed pulley from you (the one with 3 gram rollers). I just installed it. Very happy with the quality and your service was great. I will need to get some 9 gram rollers later. I'm just replying to let you know the rollers are 3 grams not 9 grams like the OKO Pulley! How much for a set of 9 grams and a set of 10 grams?
Thats really odd that the weights were 3 grams 'cause the only 3g rollers we have here are purple unless the factory screwed those up but I'll look into the other packages. we have a very limited number of 9 and 10 gram rollers so if you want them give me a call asap and I'll cut you a deal for the mishap.
VTCycles.com for performance parts.
- burnt_toast
- Veteran OG
- Posts: 3592
- Joined: Sat Jul 31, 2004 8:00 pm
- Location: Atlanta, GA
A hi-speed pulley kit in a Honda Elite S is the single best upgrade you can do. You will never notice a difference if you add other parts in at the same time. IMO it is the most critical upgrade for a Elite S hands down.burnt_toast wrote:nparks, stock pulley is fine. keli is nice but having tried lots of various trans combos, I don't find it a critical upgrade. You should get lighter rollers though, 5-6g, maybe lil more with v8 pipe.
VTCycles.com for performance parts.
Haha yeah... I haven't even got this thing to run when it had the stock setup. I just need something to get me to and from school beach side which has a speed limit of 45. I just don't want my poor Elite to be struggling to stay at 45 and having people running me over.Keoni wrote:A hi-speed pulley kit in a Honda Elite S is the single best upgrade you can do. You will never notice a difference if you add other parts in at the same time. IMO it is the most critical upgrade for a Elite S hands down.burnt_toast wrote:nparks, stock pulley is fine. keli is nice but having tried lots of various trans combos, I don't find it a critical upgrade. You should get lighter rollers though, 5-6g, maybe lil more with v8 pipe.