Ruckus Variator/Aero question
Moderator: Moderator
Ruckus Variator/Aero question
o.k. so should i want to do this do i need the whole shebang off the ruckus?i.e.- slide the complete stock one off and then the Ruckus on-i'm assuming that i have to have x amount machines off the o.d. of the ruckus housing??
busting my knuckles on vices since
for long as i can remember
for long as i can remember
Re: Ruckus Variator/Aero question
c'mon- somebody has to know...
busting my knuckles on vices since
for long as i can remember
for long as i can remember
- scooterwerx
- Elite
- Posts: 894
- Joined: Tue Oct 07, 2008 11:43 pm
- Location: redlands, ca
Re: Ruckus Variator/Aero question
yup, i cut .030 off the OD and machine a reducer for the ramp plate, since the ruck has a 14mm crank...
Re: Ruckus Variator/Aero question
could you please elaborate on the >machine a reducer for the ramp plate^ bit?
can't seem to find anyone with the specific do's and don't of this modification.i was somehow under the impression it was ,for the most part a bolt-on deal except the slight oversize of the o.d. of the variator itself.
can't seem to find anyone with the specific do's and don't of this modification.i was somehow under the impression it was ,for the most part a bolt-on deal except the slight oversize of the o.d. of the variator itself.
busting my knuckles on vices since
for long as i can remember
for long as i can remember