85 Gyro Thinking Industral Mods
Moderator: Moderator
Re: 85 Gyro Thinking Industral Mods
You just deviated from the industrial theme.....those fenders look too quaddish.....think galvanized garbage can........
RideRed
<(2)Gyro S><Helix><Sym Wolf>
"Live Large - Ride Small"
<(2)Gyro S><Helix><Sym Wolf>
"Live Large - Ride Small"
Re: 85 Gyro Thinking Industral Mods
OK a quad w/ 3 wheels .
Got the front signals wired & installed .
Got the front signals wired & installed .
- Attachments
-
- 100_9107.jpg (206.42 KiB) Viewed 18629 times
-
- 100_9110.jpg (71.02 KiB) Viewed 18629 times
-
- 100_9121.jpg (55.53 KiB) Viewed 18629 times
Re: 85 Gyro Thinking Industral Mods
Also wired a red LED above the skid plate .
Go ahead and laugh started work on a new fender (Twin Reverb)
Go ahead and laugh started work on a new fender (Twin Reverb)
- Attachments
-
- 100_9146.jpg (59.85 KiB) Viewed 18629 times
-
- 100_9157.jpg (46.35 KiB) Viewed 18629 times
-
- 100_9159.jpg (50.54 KiB) Viewed 18629 times
Re: 85 Gyro Thinking Industral Mods
Go ahead keep laughing .
- Attachments
-
- 100_9205.jpg (50.59 KiB) Viewed 18623 times
-
- 100_9171.jpg (54.23 KiB) Viewed 18623 times
-
- 100_9170.jpg (55.05 KiB) Viewed 18623 times
Re: 85 Gyro Thinking Industral Mods
LOL Don't stop ... make fun ... Started cutting fender .
- Attachments
-
- 100_9160.jpg (69.04 KiB) Viewed 18623 times
-
- 100_9163.jpg (61.77 KiB) Viewed 18623 times
-
- 100_9169.jpg (68.25 KiB) Viewed 18623 times
- tazland001
- Board Supporter
- Posts: 1333
- Joined: Thu Apr 30, 2009 11:46 pm
Re: 85 Gyro Thinking Industral Mods
Hows my Gyro comin along? lol
Taz
Taz
Re: 85 Gyro Thinking Industral Mods
Almost done ... Looking good ....tazland001 wrote:Hows my Gyro comin along? lol
Taz
- Attachments
-
- Tazz do you want to make any changes ?
- MotoGyro 2.jpg (84.4 KiB) Viewed 18609 times
Re: 85 Gyro Thinking Industral Mods
6/20/11 Still working on fender / not as easy as I thought ...
- Attachments
-
- 100_9329.jpg (36.9 KiB) Viewed 18589 times
-
- I got a small sheet of aluminum this will hold the sides together probably use rivets
- 100_9325.jpg (59.31 KiB) Viewed 18589 times
-
- This might be close to the final shape then paint black .
- 100_9334.jpg (61.58 KiB) Viewed 18589 times
- tazland001
- Board Supporter
- Posts: 1333
- Joined: Thu Apr 30, 2009 11:46 pm
Re: 85 Gyro Thinking Industral Mods
Im not sure about this one six. it looks like its startin to come along but looks a bit funky. I guess I will have to wait for the finished product.
Taz
Taz
Re: 85 Gyro Thinking Industral Mods
I love the idea... Steampunk/Industrial is great stuff... kinda wish you went more for the "Mad Max" thing, but...
Was thinking of Steampunking my 86 Spree.
Was thinking of Steampunking my 86 Spree.
1986 Spree
Re: 85 Gyro Thinking Industral Mods
TAZZ YOUR KIDDING RIGHT ?tazland001 wrote:Im not sure about this one six. it looks like its startin to come along but looks a bit funky. I guess I will have to wait for the finished product.
Taz
Still working on this fender .
It's not even close to being finished .
So you think I should go with the stock Honda fender ?
- Attachments
-
- 100_9371.jpg (56.6 KiB) Viewed 18568 times
-
- 100_9387.jpg (46.3 KiB) Viewed 18568 times
-
- 100_9388.jpg (69.12 KiB) Viewed 18568 times
Re: 85 Gyro Thinking Industral Mods
OK keep laughing ...
Make fun of me ...
I keep hearing people say I need a battery cover ...
I can't find one ...
Fine make your own .
Go ahead laugh ...
Keep laughing ....
I worked on making some foot pegs but they will be a little different .
Here is the basic I looked everywhere for the correct pipe size ,
Finally found a jack handle that fit (hope I don't have to change a tire )
Make fun of me ...
I keep hearing people say I need a battery cover ...
I can't find one ...
Fine make your own .
Go ahead laugh ...
Keep laughing ....
I worked on making some foot pegs but they will be a little different .
Here is the basic I looked everywhere for the correct pipe size ,
Finally found a jack handle that fit (hope I don't have to change a tire )
- Attachments
-
- 100_9492.jpg (52.73 KiB) Viewed 18556 times
-
- 100_9491.jpg (41.76 KiB) Viewed 18556 times
-
- 100_9490.jpg (39.37 KiB) Viewed 18556 times
Re: 85 Gyro Thinking Industral Mods
Back to the battery cover ...
I would tell you whats going on the back for tail lights
but you would probably get a stomach ache from laughing ....
I was going to use all metal but thought it would be to hard to
axcess the battery ,so I made a small plastic cover .
I also noticed when I was marking the cuts with a sharpie
the black looked pretty good .... I wonder if sharpie sells
the black ink to use on plastic ? I know paint will just crack .
I would tell you whats going on the back for tail lights
but you would probably get a stomach ache from laughing ....
I was going to use all metal but thought it would be to hard to
axcess the battery ,so I made a small plastic cover .
I also noticed when I was marking the cuts with a sharpie
the black looked pretty good .... I wonder if sharpie sells
the black ink to use on plastic ? I know paint will just crack .
- Attachments
-
- 100_9474.jpg (53.91 KiB) Viewed 18555 times
-
- I cut a notch to axcess the oil cap
- 100_9503.jpg (59.58 KiB) Viewed 18555 times
-
- 100_9511.jpg (49.55 KiB) Viewed 18555 times
Re: 85 Gyro Thinking Industral Mods
MORE PICS . Laugh go ahead ...Keep laughing ...
- Attachments
-
- 100_9504.jpg (59.92 KiB) Viewed 18554 times
Re: 85 Gyro Thinking Industral Mods
I always had a problem with the rubber holding the indicator lights rotting
so I made a cover ... Yes I used small PVC for containing the light .
Yea laugh ...
so I made a cover ... Yes I used small PVC for containing the light .
Yea laugh ...
- Attachments
-
- 100_9234.jpg (56.57 KiB) Viewed 18553 times
-
- 100_9256.jpg (43.94 KiB) Viewed 18553 times
-
- 100_9246.jpg (41.28 KiB) Viewed 18553 times