Honda Spree and Elite 50 Forums

I love the black and blue Dio ^^^
Awesome!!!!

That scoot is in great shape! Great connection you have there. Very nice looking DIO

Do you want me to get the af18 from patrick powder coated same color or just bead blasted? I'm going to do a ton of measurements on the af18 before porting so we can have an accurate measure of the volume and dimensions of it compared to the af16.

very very nice my friend.

graphite9 wrote:1man Im not eve sure what that motor is going into. For right now lets just get it cleaned up. Unless you have a good source to coat it local.

I will offer 10% off Powder coating for any Hondaspree.net Members. And will Donate that 10% to Hondaspree.net Website....I'm located in St.charles, Missouri..

I can bring it by tims if I go out there next weekend. He does great work!

Sick motor! can't wait to see it mounted!




J

Woah, motor looks clean as heck. You should really look into getting a parts manual to source all the bolts and whatnot.

d*** i need to come over and check her out.

Use your nip from the manifold just like you would a normal vacuum style petcock.
Looks sweet!

1man8scoots wrote:Use your nip from the manifold just like you would a normal vacuum style petcock.
Looks sweet!

I'm not sure that will work/

fuel pump needs to be hooked to the case after the reeds not before.

Pretty sure you can just move the nipple to the bottom half of the intake and seal the original hole, that way it is below the reeds. Pretty sure that's what downsouthdio did on his.

Yap the reason why fuel pump vaccum fail.. need to tap below the reed valve on buttom intake manifold.
The af16 block don't have a brass fitting below the starter.

Yes on gavaity fuel tank , you can on oil pump plug add a nipple or stock oil pump , remove the shaft. Need a rubber cap on Oil line.

Oops, they are correct. Ha I must have been sleepy. Extra work on top of everything I need to slow down and read what I write before giving poor advice.

Like so