New Elite afermarket parts part 1+2+3

Dac · Post by **Dac** » Sun Jan 13, 2008 8:24 pm

Thats cool.

What you got for gearing?

burnt_toast · Post by **burnt_toast** » Sun Jan 13, 2008 9:05 pm

Dac wrote:Thats cool.

What you got for gearing?

Stockers holla haha for now anyway.

I've decided that is one thing I will figure out once I have the bike setup first.

stillspeeding · Post by **stillspeeding** » Thu Jan 17, 2008 1:09 am

yea, without gearing that bore will blow, and the carb is to small, 28mm is standard.

burnt_toast · Post by **burnt_toast** » Thu Jan 17, 2008 7:33 pm

stillspeeding wrote:yea, without gearing that bore will blow, and the carb is to small, 28mm is standard.

it'll blow huh.. blow your brains out ya fool!

burnt_toast · Post by **burnt_toast** » Fri Jan 18, 2008 5:38 pm

Package from VT arrived TOOODAY

(pics up soon)

Last thing I'm waiting on before I start assembling is a 28mm OKO that I'm trading for my 21mm holla

burnt_toast · Post by **burnt_toast** » Mon Jan 21, 2008 8:52 pm

As promised, here's pics from my VT Cycles Order

Still waiting on a 28mm OKO from a hawaii member, and still on lookout for gear options..

Parts:
-Billet Alum Oil Plug
-Red Adj Throttle Cable
-Kuka 1500rpm Torque Spring (freebie)
-Top End Nut and Stud kit
-Charmo 50mm Alum head
-PG Long Exhaust

Now this is a CHERRY PG Long!

Dac · Post by **Dac** » Mon Jan 21, 2008 9:16 pm

were is the picture of the oil pump?

DUDE! a frickin PG LONG! ! ! ! ! ! ! !
BAD *! ! ! ! ! ! !

burnt_toast · Post by **burnt_toast** » Mon Jan 21, 2008 11:34 pm

Dac wrote:were is the picture of the oil pump?

DUDE! a frickin PG LONG! ! ! ! ! ! ! !
BAD *! ! ! ! ! ! !

werdd haha I was holding it and rocking it like a baby once I got the package!

And do you mean oil pump plug? Look at the pic of centerspring, its inside the plastic.

Dac · Post by **Dac** » Tue Jan 22, 2008 12:21 am

oh ok, your going to run premix?
im going to hook my oiler back up come spring.
[i seen that but didnt know what it was. why would it be in there?]

man...
i wish i was you right now...

burnt_toast · Post by **burnt_toast** » Tue Jan 22, 2008 10:30 am

Dac wrote:oh ok, your going to run premix?
im going to hook my oiler back up come spring.
[i seen that but didnt know what it was. why would it be in there?]

man...
i wish i was you right now...

Well actually i'm taking some pretty hard classes and wish I had time right now.. lol

Yes I will be running premix, they just packaged it in there so it wouldn't bounce around I suppose.

Dac · Post by **Dac** » Tue Jan 22, 2008 10:37 am

how much did that plug cost you?
i guess if i were to get one of those i could still run premix.

burnt_toast · Post by **burnt_toast** » Tue Jan 22, 2008 11:52 am

Dac wrote:how much did that plug cost you?
i guess if i were to get one of those i could still run premix.

Well thats what its made for, block off old injector hole and fill in the crank case volume. Keoni said you can also just take the gear off the injector, but I decided not to skimp out on this detail.

They are $10, I got this one for $8 w/ discount.

Dac · Post by **Dac** » Tue Jan 22, 2008 11:58 am

i think im going to pick one up.

The pump is still going on mine, i know thats really bad so i need to do something before i ride it anymore.

burnt_toast · Post by **burnt_toast** » Tue Jan 22, 2008 2:16 pm

Dac wrote:i think im going to pick one up.

The pump is still going on mine, i know thats really bad so i need to do something before i ride it anymore.

Its a pretty easy fix if you dont want to remove it for now, just recirculate the line back to the pump and disconnect from manifold. Then only run premix.

burnt_toast · Post by **burnt_toast** » Tue Jan 29, 2008 10:44 am

Just came in yesterday: 28mm OKO! and dang this thing is huge compared to my 21mm and smaller minarelli carbs

Pics soon to come. I now have everything to start piecing together, besides gears which I'm still deciding on.

Stay tuned