The bolts that attach to the back rack are both stripped and unusable. No threads.
I know if i need a nut on there indefinitely I'm sure there is a fix that is not too hard, but what could I do both fasten the rack and keep it removable.
What to do about no threads...
Moderator: Moderator
What to do about no threads...
1993 Elite - The Mad Max
Re: What to do about no threads...
You can buy aluminum thread inserts call Riv-nuts.
http://mdmetric.com/prod/rivetnuttool/rivetnuttool.htm
http://mdmetric.com/prod/rivetnuttool/rivetnuttool.htm
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
- Wheelman-111
- Moderator
- Posts: 11322
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
no threads...
Greetings:
Suggestion 2:
Cut existing studs off flush. Drill and tap for All-Thread 6mm. Screw those in with red LocTite or spot-weld them on.
Suggestion 2:
Cut existing studs off flush. Drill and tap for All-Thread 6mm. Screw those in with red LocTite or spot-weld them on.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: What to do about no threads...
Or grind, drill and tap from top and just use a M6 bolt...
You may be able to cut a smaller nut thread (SAE #10 screw?) on what's left of the stud and run a washer, as well.
You may be able to cut a smaller nut thread (SAE #10 screw?) on what's left of the stud and run a washer, as well.
Admin, Hondaspree.net
Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
Re: What to do about no threads...
im actually doing that exact repair right now. i ground down both studs, drilled a 1/4 hole and i will be putting a new metric bolt from the bottom and welding them in place. cut to size and voila done.
1986 honda spree(silver fox)
BBK
85 head
SB50 intake
SB50 reeds
taz gears
2.75X10 tires
2000 honda elite S
prodigy vari
2k grabber clutch springs
9:1 gears
jdm tail lite
1982 suzuki FA50
BBK
85 head
SB50 intake
SB50 reeds
taz gears
2.75X10 tires
2000 honda elite S
prodigy vari
2k grabber clutch springs
9:1 gears
jdm tail lite
1982 suzuki FA50
Re: What to do about no threads...
This sounds like the "easiest" way to do it, though i have done only a little grinding in my life(...) and never done any welding. Do you think JB weld would hold enough given the head of the bolt is still on the other side?odinxxix wrote:im actually doing that exact repair right now. i ground down both studs, drilled a 1/4 hole and i will be putting a new metric bolt from the bottom and welding them in place. cut to size and voila done.
1993 Elite - The Mad Max
Re: What to do about no threads...
i dont see why not, just have to make sure that all surfaces are real clean free of oil ,grease, and if you can paint.
1986 honda spree(silver fox)
BBK
85 head
SB50 intake
SB50 reeds
taz gears
2.75X10 tires
2000 honda elite S
prodigy vari
2k grabber clutch springs
9:1 gears
jdm tail lite
1982 suzuki FA50
BBK
85 head
SB50 intake
SB50 reeds
taz gears
2.75X10 tires
2000 honda elite S
prodigy vari
2k grabber clutch springs
9:1 gears
jdm tail lite
1982 suzuki FA50
Re: What to do about no threads...
Why'd you have to go and post that? Now I have something else to buy.Bear45-70 wrote:You can buy aluminum thread inserts call Riv-nuts.
http://mdmetric.com/prod/rivetnuttool/rivetnuttool.htm
Re: What to do about no threads...
Because they work and are easy to install. I have a pair in the walls of my 1999 Ranger that the hold down screws for the bed box go into, no nuts underneath for me, thank you.GIJoeBob wrote:Why'd you have to go and post that? Now I have something else to buy.Bear45-70 wrote:You can buy aluminum thread inserts call Riv-nuts.
http://mdmetric.com/prod/rivetnuttool/rivetnuttool.htm
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree