Honda Spree and Elite 50 Forums

Hey I've been trying to find a honda pal belt from some where. I can only find one for $70+. Does any one know where to get on for less. Or is there a simalar belt on another scooter that would work?

The honda pal is the honda elite e in usa. So there you go. You can know go find your belt. Remeber the elite e not the elite s, sr or lx.

Taz

Greetings:

Hmm, not so sure it's the same transmission. Scroll down to the pics of the Pal Here, and check out that funky 2-part belt cover. Wasn't the Pal equipped with a Variator? If someone could touch the parts, it'd go a long way to assist the introduction of a Spree-compatible variator system.

Remember I use to import the pal from japan. It is the same. Both engine types run the elite e belt. One pal had a variator and one did not. I still have one honda pal but it is tore up from the ground up. And it is not the variator one. See one pal has a longer crankshaft so a variator can fit. And that makes the kickstarter cover wider. but it is the same belt.
Taz

Choice thanks heaps for your help ill check out elite e see what I can find

a single case cover means its a nb50 engine.

The NQ50 and NB50, both have single piece cover. They will take same belt.
Here is a source for much less than what you have found.

http://www.sunrisehonda.com/fiche_secti ... &fveh=3648

BELT, DRIVE 23100-GK8-870 001 $27.78 American Money

My guess would be that the variated version, (available only in Canada, to my knowledge) would be same as the AF05E found on the NB50, SE50 and 1989-1993 SA50.

Something else to be noted about these, because the non-variated models were single reduction rearend, the rotation is counter-clockwise. The variated models were double reduction rearend and rotation is clockwise.