Belts?
Moderator: Moderator
Belts?
Why is there not a listing for all the different belt sizes for the different model scooters?
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
-
Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: Belts?
Greetings:
Good suggestion, Bear.
1984-'87 SpreeNQ50: I dunno. But you do...
1988-'90 Elite "E" SB50: Probably same as the Spree.
1983-84 Aero NB50M: Nobody really knows.
1985-'87 Aero NB50, 1987 Elite SE50, 1988-'93 Elite SA50, 1994-2001 Elite SA50, including all variants and P-model restricted scooters: 641 x 15.5 x30
ZX Transmission conversions: Standard or Aftermarket Elite Variator: 654 x 18 x 30
Oversize "For Ruckus" Variator: 669 x 18 x 30. (watch out for case and belt cover contact.)
Aero 80, Aero 125: You tell us!
Good suggestion, Bear.
1984-'87 SpreeNQ50: I dunno. But you do...
1988-'90 Elite "E" SB50: Probably same as the Spree.
1983-84 Aero NB50M: Nobody really knows.
1985-'87 Aero NB50, 1987 Elite SE50, 1988-'93 Elite SA50, 1994-2001 Elite SA50, including all variants and P-model restricted scooters: 641 x 15.5 x30
ZX Transmission conversions: Standard or Aftermarket Elite Variator: 654 x 18 x 30
Oversize "For Ruckus" Variator: 669 x 18 x 30. (watch out for case and belt cover contact.)
Aero 80, Aero 125: You tell us!
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: Belts?
Spree - 628mm X 11.4mm X 30 (24.7244ÔÇØ X 0.4488ÔÇØ)
Aero 80 - 745mm X 15mm (29.3307" X 0.5906")
Aero 125 - 794mm X 18mm X 30 (31.2598" X 0.7087")
Aero 80 - 745mm X 15mm (29.3307" X 0.5906")
Aero 125 - 794mm X 18mm X 30 (31.2598" X 0.7087")
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: Belts?
i've threw zx drive parts in an elite, and i had a 669 belt. it lokoed like it fit fine. and that post about the conversion, seems like the belt digs in the clutch too much on the picture. the belt fit like putting it in a stock belt new the other belt was new.