Page 1 of 1
All of the above
Posted: Thu Feb 03, 2011 12:29 am
by Trafficjamz
Stock Bore-39mm, 66cc - 45mm, 72cc - 47mm, 78cc - 49mm, 82cc - 50mm, ??cc - 51mm, 55mm - 125cc
Re: All of the above
Posted: Thu Feb 03, 2011 2:08 am
by KINGÔäó
51mm=89cc?
Re: All of the above
Posted: Thu Feb 03, 2011 3:00 am
by that guy
Does this measurement go for all honda scooter motors
Re: All of the above
Posted: Thu Feb 03, 2011 3:13 am
by 808BMW
51mm=84.6cc (85cc to be generous
) on a stock crank... All those measurements would be on a stock elite crank (41.4) except for the 55mm bore, which is 125cc with a 52.6 crank.
Re: All of the above
Posted: Thu Feb 03, 2011 12:49 pm
by Trafficjamz
808BMW wrote:51mm=84.6cc (85cc to be generous
) on a stock crank... All those measurements would be on a stock elite crank (41.4) except for the 55mm bore, which is 125cc with a 52.6 crank.
Yes sir
808 is 100% correct
Are there any bore sizes that I don't have listed?
Re: All of the above
Posted: Thu Feb 03, 2011 1:06 pm
by 808BMW
54mm stroker bores are fairly common, 120cc with a 52.6 crank.
Then there's the wonderful world of small strokers, 50/51 cranks teamed up with all kinds of stuff (50/51/54/55), and the new 130 stroker (56mm bore 52.7mm crank).
Re: All of the above
Posted: Thu Feb 03, 2011 4:19 pm
by fastplastic
nice you can see my sexy beast sitting on the shelf