****Official Picture Post...The Sequel****
Moderator: Moderator
Re: ****Official Picture Post...The Sequel****
dd50 sym build
edit.. have to resize image
edit.. have to resize image
- Florida Antique
- Noob
- Posts: 3
- Joined: Thu Mar 12, 2015 11:28 am
- Location: Clermont, FL
Re: ****Official Picture Post...The Sequel****
Old and the new, 26 years difference
- Attachments
-
- Oldandnew800x600SM.jpg (206.97 KiB) Viewed 18379 times
'83 Honda Aero 80
'84 Honda Aero 125
'05 Yamaha Zuma (dual headlight mod)
'09 Yamaha Vino Classic 50(one of them newfangled 4 stroke things)
http://scooters4hooters.com
'84 Honda Aero 125
'05 Yamaha Zuma (dual headlight mod)
'09 Yamaha Vino Classic 50(one of them newfangled 4 stroke things)
http://scooters4hooters.com
Re: ****Official Picture Post...The Sequel****
- Attachments
-
- 20150423_023413.jpg (175.72 KiB) Viewed 18316 times
-
- 20150423_023857.jpg (172.84 KiB) Viewed 18316 times
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
Re: ****Official Picture Post...The Sequel****
Its not a 50cc but it's very comfortable.
- Attachments
-
- 20150626_145621.jpg (180.49 KiB) Viewed 18223 times
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
Re: ****Official Picture Post...The Sequel****
I did cut the Exhaust pipe to make it a shorty
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
Re: ****Official Picture Post...The Sequel****
Reflex 85mph
metro 35mph
94 elite SR 55mph
spreedio 65mph
metro 35mph
94 elite SR 55mph
spreedio 65mph
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
Re: ****Official Picture Post...The Sequel****
My 88 Elite. Stock cylinder, ruckus variator and a custom 3D printed air intake. Does great on these San Francisco hills.
- Attachments
-
- SHRED
- Scoot.jpg (139.66 KiB) Viewed 18109 times
xXsHrEdXx
- Wheelman-111
- Moderator
- Posts: 11321
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: ****Official Picture Post...The Sequel****
Greetings:
Very understated and clean. 3D printed air intake? Do Show & Tell!
Very understated and clean. 3D printed air intake? Do Show & Tell!
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: ****Official Picture Post...The Sequel****
In a response to wheel man:
I work at a 3D printing shop in San Francisco with access to several high end and consumer grade printers. I had this old k&n laying around and decided to put it to use (my stock airbox was also thrashed and not sealing correctly). Needless to say the filter did not fit the stock carb. I took it upon myself to design and print a (bellmouth) type mount for the filter to fit on to the carb, I used Rhino for the design work. The first iteration is the white one you see below. It was getting way to much air and bogging the high end down. The walls of the print were not that thick and got gas on the printed part immediately, eating away at the plastic. On to round two, I thickened the printed part up quite a bit. Still the same issue of gas eating away at the plastic. After 6 or so iterations I settled on the metal looking part. The walls were very thick, I wrapped the print with metal duct tape and made a flat section for a hose clamp to grip the part onto the carb. I ended up having to tape the filter up a bit as it was getting too much air and bogging down. Scoot picked up a little grunt and has a custom intake. I am very happy with how it turned out!! Now Im trying to think what I can do next! Any suggestions are welcome!!
I work at a 3D printing shop in San Francisco with access to several high end and consumer grade printers. I had this old k&n laying around and decided to put it to use (my stock airbox was also thrashed and not sealing correctly). Needless to say the filter did not fit the stock carb. I took it upon myself to design and print a (bellmouth) type mount for the filter to fit on to the carb, I used Rhino for the design work. The first iteration is the white one you see below. It was getting way to much air and bogging the high end down. The walls of the print were not that thick and got gas on the printed part immediately, eating away at the plastic. On to round two, I thickened the printed part up quite a bit. Still the same issue of gas eating away at the plastic. After 6 or so iterations I settled on the metal looking part. The walls were very thick, I wrapped the print with metal duct tape and made a flat section for a hose clamp to grip the part onto the carb. I ended up having to tape the filter up a bit as it was getting too much air and bogging down. Scoot picked up a little grunt and has a custom intake. I am very happy with how it turned out!! Now Im trying to think what I can do next! Any suggestions are welcome!!
- Attachments
-
- 4.jpg (56.51 KiB) Viewed 18099 times
-
- 3.jpg (67.31 KiB) Viewed 18099 times
-
- 1.jpg (88.94 KiB) Viewed 18099 times
xXsHrEdXx
Re: ****Official Picture Post...The Sequel****
A total of 6 iterations.
- Attachments
-
- 2.jpg (122.03 KiB) Viewed 18456 times
xXsHrEdXx
Re: ****Official Picture Post...The Sequel****
Greetings:
Just wanted to show off my latest mod. Some LEDs for more night visibility!!
Just wanted to show off my latest mod. Some LEDs for more night visibility!!
- Attachments
-
- Screen Shot 2015-11-08 at 6.12.12 PM.jpg (242 KiB) Viewed 18397 times
xXsHrEdXx
- Rip_City_Spree
- CB900F
- Posts: 1379
- Joined: Sun Jun 13, 2010 7:47 pm
Re: ****Official Picture Post...The Sequel****
The "GOOCH"
- Attachments
-
- image.jpeg (44.23 KiB) Viewed 18340 times
01 Elite SR
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
Re: ****Official Picture Post...The Sequel****
A spot of night time running in
- Attachments
-
- Night run in.jpg (163.24 KiB) Viewed 18306 times