I have a 19834 spree, 1000 original miles, it sat for 10 years, started and ran rough for a few days, and has been sitting ever since. I have collected a few new parts, gas tank, carb, cdi, brake shoes, air filter. I would greatly appreciate any advise as to what else should be broken down or replaced. Wiring and hoses are in good shape.
Should I break down the oil pump assembly, should I do anything to the cylinder?
Any suggestions would be welcomed
Edlk
Starting a 1984 spree rebuild
Moderator: Moderator
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: Starting a 1984 spree rebuild
take some photo..
we like photo but when we color on the screen not so munch fun..
it all ways fun to see it from what it was to see the nice finch photo
swimmingfree
we like photo but when we color on the screen not so munch fun..
it all ways fun to see it from what it was to see the nice finch photo
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
-
- Elite
- Posts: 722
- Joined: Thu Apr 19, 2007 6:40 pm
- Location: oregon coast
Re: Starting a 1984 spree rebuild
First thing I do is replace the fuel lines and put an online filter in. Even if they look fine. Small pieces of rubber play * on trying to keep your carb clean
Re: Starting a 1984 spree rebuild
How about the oil pump
Does it make sense to take it out give it a good cleaning and reinstall
The oil seems clean that was in the tank
Does it make sense to take it out give it a good cleaning and reinstall
The oil seems clean that was in the tank