rimss

305elite · Post by **305elite** » Tue Oct 04, 2011 5:59 pm

r Honda elite and Honda Spree rims the same?

Wheelman-111 · Post by **Wheelman-111** » Tue Oct 04, 2011 6:09 pm

Greetings:

The '01 Elite rims are 1.85" wide. Sprees are 1.5 IIRC. More importantly, the Spree brake drum diameter is considerably smaller, so the rims are very different.

305elite · Post by **305elite** » Tue Oct 04, 2011 10:09 pm

thanks for your input very appreciated

305elite · Post by **305elite** » Sun Oct 23, 2011 12:23 am

Can I swap a front rim and brake hub from a elite SR to a spree without changing the complete fork setup

bradthreee · Post by **bradthreee** » Sun Oct 23, 2011 12:09 pm

No you cant

eliteguy50 · Post by **eliteguy50** » Sun Oct 23, 2011 2:42 pm

305elite wrote:r Honda elite and Honda Spree rims the same?

Yes, the Honda elite (sb50) and Honda Spree rims r the same.

305elite · Post by **305elite** » Thu Oct 27, 2011 8:47 pm

Will a elite rim with a 350 tire fit on the back of a spree with no rubbing or any other issue?

eliteguy50 · Post by **eliteguy50** » Thu Oct 27, 2011 10:04 pm

305elite wrote:Will a elite rim with a 350 tire fit on the back of a spree with no rubbing or any other issue?

No.

305elite · Post by **305elite** » Thu Oct 27, 2011 10:40 pm

Eliteguy50...are you sure...u also said that the elite and spree rims are the same and they are not

martynkim · Post by **martynkim** » Thu Oct 27, 2011 11:09 pm

Elite and Spree rims are different.

eliteguy50 · Post by **eliteguy50** » Fri Oct 28, 2011 12:03 am

305elite wrote:Eliteguy50...are you sure...u also said that the elite and spree rims are the same and they are not

Read it again.

eliteguy50 wrote:
305elite wrote:r Honda elite and Honda Spree rims the same?
Yes, the Honda elite (sb50) and Honda Spree rims r the same.

Yes, the elite (sb50) rims are the same as the spree rims. Yes, a 3.5x10 tube type tire can be mounted on any of the elite rims. Will an elite rim and a 3.5 tire fit on a stock spree with no issues? No, there isn't enough room for the 3.5x10 tire to fit no matter what rim you have it on.

FYI, there are several Honda Elite scoots, like sa50 (with the variated af05 and the af16), sb50, se50, then 80-250cc
When you are looking at rims, be specific.

bradthreee · Post by **bradthreee** » Fri Oct 28, 2011 9:17 am

EliteGuy is right,

There is one particular Elite model SB50 that uses basically the same motor as the Spree. That means the rear rim fits the Spree.

Every other Elite rims will not fit the Spree.

As for the tire, how about you try it out for yourself and see if the 3.50 tire fits

305elite · Post by **305elite** » Sat Oct 29, 2011 12:48 pm

Why try it out my self when I can utilize the forum and use it for what its for and see if anyone has tried this without wasting time and money on something that might possibly not work.....

Wheelman-111 · Post by **Wheelman-111** » Sun Oct 30, 2011 10:56 pm

Greetings:

The 3.50 tire is troublesome on the SA 05 and SA 16 blocks in any case. Lots of crankcase carving is necessary just to mount the wheel, but even more as speeds climb and the tire "stretches" centrifugally.
There's even more trouble fitting an Aero or Elite 50 block to a Spree, as fender clearance, stand clearance (if so equipped) must be considered.
The 3.50 just isn't worth the trouble, if you ax me.
Both the 3.50 and 90/90 shape better on Metropolitan 2.15" Tubeless rims. I would advise the same-width, shorter height 90/90 for either Variated block.
The biggest tire that fits a stock Spree or SB50 Elite "E" block and frame is 2.75.

Honda Spree and Elite 50 Forums

rimss

rimss

Re: rimss

Re: rimss

Re: rimss

Re: rimss

Re: rimss

Re: rimss

Re: rimss

Re: rimss

Re: rimss

Re: rimss

Re: rimss

Re: rimss

Re: rimss