Looking for Scooter Mechanic in Michigan
Moderator: Moderator
- SpreeMadness520
- Elite
- Posts: 773
- Joined: Sat Mar 12, 2011 2:21 pm
- Location: Hart Michigan
Re: Looking for Scooter Mechanic in Michigan
Yeah I really like it
130cc Stroker
1984 Porsche 944
1965 Vespa
1984 Porsche 944
1965 Vespa
Re: Looking for Scooter Mechanic in Michigan
Trafficjamz = I know why you haven't received the headlight housing - I never shipped it! I found it under my desk still packed in a box (I'd put it in the "keep an empty small box in case you need to ship something small" box spot). It'll be going out today. Still waiting on the other parts to come in.
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Looking for Scooter Mechanic in Michigan
jcivince wrote:Trafficjamz = I know why you haven't received the headlight housing - I found it under my desk still packed in a box
I don't know why i didn't look there.
no worries.....send it when you get a chance.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: Looking for Scooter Mechanic in Michigan
Had a really busy weekend - didn't get the bulb housing out until last night so it won't be to you until tomorrow (Wednesday). Also need to follow-up on the new parts I ordered - can't believe they aren't here yet.
Re: Looking for Scooter Mechanic in Michigan
The additional parts shipped today so to me tomorrow and to Trafficjamz on Thursday!
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Looking for Scooter Mechanic in Michigan
I have all day thursday to work on your scooter.
Any idea when you might want to pick up your scooter?
No rush....I enjoy having it around
Any idea when you might want to pick up your scooter?
No rush....I enjoy having it around
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: Looking for Scooter Mechanic in Michigan
Maybe this Saturday early AM but more likely to be Saturday the 23rd.
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Looking for Scooter Mechanic in Michigan
jcivince wrote:Maybe this Saturday early AM but more likely to be Saturday the 23rd.
Sounds like a plan to me
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: Looking for Scooter Mechanic in Michigan
They shipped the parts to my house (didn't get delivered until 5:30pm). I dropped them off at FedEx tonight but they won't get to East Lake until Friday. And schedule looks like it's going to have to be July 23 for pick-up. I guess I can wait another week...
Re: Looking for Scooter Mechanic in Michigan
Looking good for Saturday. Everything all set? Planning to go to the Sixth ST address unless you tell me differently.
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Looking for Scooter Mechanic in Michigan
jcivince wrote:Looking good for Saturday. Everything all set? Planning to go to the Sixth ST address unless you tell me differently.
Sounds good to me.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Looking for Scooter Mechanic in Michigan
about what time on saturday?
err umm .... today?
err umm .... today?
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Looking for Scooter Mechanic in Michigan
Little yellow scooter is finally out of my garage.
It will be missed.
I have to admit, the stock pipe on a polini bore was a lot nicer than I would have ever imagined.
@ jvince Remember that when you first start the scooter (cold) the choke plunger should be pulled and no throttle should be applied.
Have fun with your new toy. If you ever want to sell it, give me first dibs
It will be missed.
I have to admit, the stock pipe on a polini bore was a lot nicer than I would have ever imagined.
@ jvince Remember that when you first start the scooter (cold) the choke plunger should be pulled and no throttle should be applied.
Have fun with your new toy. If you ever want to sell it, give me first dibs
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: Looking for Scooter Mechanic in Michigan
I think you're the first i heard say that. I liked my stock pipe on the contessa, quiet, quick, and for in town riding it did the jobTrafficjamz wrote:I have to admit, the stock pipe on a polini bore was a lot nicer than I would have ever imagined.
2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
Re: Looking for Scooter Mechanic in Michigan
I agree I like the stock pipe on the contesta since I rarely go WOT I like to have a good low and midrange response
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma