Jiang Wayne exhaust for Spree does not fit Spree
Moderator: Moderator
- patthesoundguy
- Moderator
- Posts: 3159
- Joined: Mon Mar 29, 2010 11:38 am
- Location: Nova Scotia, Canada
- Contact:
Jiang Wayne exhaust for Spree does not fit Spree
just an FYI this jiang wayne exhaust doesnt fit an 84 Spree... At lest not mine... Yet...
I took a chance on it because it was on sale and I finally have money to spend on somthing like that. It did say may or may not fit the spree.
http://www.jiangwayne.com/scooter/p_i.php?i=57
Its so very close that i think by cutting the flange off and rotaing it to match the head and re-welding, it'll work. and fabbing up a mounting bracket adapter by the fan shroud im gonna be good to go. Oh and I may need to wrap the header pipe its going to be a little close to the side plastic. Any thoughts you folks have, I'd love to hear them.
I took a chance on it because it was on sale and I finally have money to spend on somthing like that. It did say may or may not fit the spree.
http://www.jiangwayne.com/scooter/p_i.php?i=57
Its so very close that i think by cutting the flange off and rotaing it to match the head and re-welding, it'll work. and fabbing up a mounting bracket adapter by the fan shroud im gonna be good to go. Oh and I may need to wrap the header pipe its going to be a little close to the side plastic. Any thoughts you folks have, I'd love to hear them.
Dude! Ya Can't Fix Stupid!
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
Jiang Wayne exhaust for Spree does not fit Spree
Wow close but just off. If you have the time and a welder go for it!
SYM dd
50mm 82cc KABOOOOOMMM
Strengthend crank
V8 typhoon
Malossi clutch springs yellow
Datona +20% center spring
kitako type x variator
Oko28mm
CT intake
50mm 82cc KABOOOOOMMM
Strengthend crank
V8 typhoon
Malossi clutch springs yellow
Datona +20% center spring
kitako type x variator
Oko28mm
CT intake
Jiang Wayne exhaust for Spree does not fit Spree
Or cut the header off the original and weld that on!!
SYM dd
50mm 82cc KABOOOOOMMM
Strengthend crank
V8 typhoon
Malossi clutch springs yellow
Datona +20% center spring
kitako type x variator
Oko28mm
CT intake
50mm 82cc KABOOOOOMMM
Strengthend crank
V8 typhoon
Malossi clutch springs yellow
Datona +20% center spring
kitako type x variator
Oko28mm
CT intake
-
- CBR1000RR
- Posts: 4219
- Joined: Thu Mar 05, 2009 9:02 pm
- Location: Iowa, USA
Re: Jiang Wayne exhaust for Spree does not fit Spree
Looks like the variated pipe to me.
motormike wrote:Errands become adventures.
-
- Veteran OG
- Posts: 3639
- Joined: Tue May 22, 2007 8:10 pm
- Location: North of Seattle, WA
Re: Jiang Wayne exhaust for Spree does not fit Spree
It's odd, the website says it fits AF05/GN2 models and maybe the Spree. patthesoundguy - it does not look like the pipe fits up to an AF05 eitherLooks like the variated pipe to me.
Send Jiang an email with the your pics and ours.
AF05 cyl
Spree cyl
- patthesoundguy
- Moderator
- Posts: 3159
- Joined: Mon Mar 29, 2010 11:38 am
- Location: Nova Scotia, Canada
- Contact:
Re: Jiang Wayne exhaust for Spree does not fit Spree
I will totally email them the pics that's a good idea.mousewheels wrote:It's odd, the website says it fits AF05/GN2 models and maybe the Spree. patthesoundguy - it does not look like the pipe fits up to an AF05 eitherLooks like the variated pipe to me.
Send Jiang an email with the your pics and ours.
AF05 cyl
Spree cyl
Dude! Ya Can't Fix Stupid!
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
-
- Veteran OG
- Posts: 3639
- Joined: Tue May 22, 2007 8:10 pm
- Location: North of Seattle, WA
Re: Jiang Wayne exhaust for Spree does not fit Spree
Good move - hope 'jiangwayne.com' will take good care of you, and fix their infoI will totally email them the pics that's a good idea.
If you need more supporting info, the gang here will help.
- patthesoundguy
- Moderator
- Posts: 3159
- Joined: Mon Mar 29, 2010 11:38 am
- Location: Nova Scotia, Canada
- Contact:
Re: Jiang Wayne exhaust for Spree does not fit Spree
the exhaust was still worth it, especially once I get it all on there. I hacked the flange off it yesterday and re-welded it on. It was almost a disaster... I slipped with the wire and burnt a hole in the 90 section of the pipe. got it welded over though. Here are the pics of the progress.
this is my bracket that will relocate the the mounting holes for the offset of the new pipe.
It started out as a 3" wide x 1/4" plate. I cut it free hand by marking with a sharpie and triming with the angle grinder a little at a time. Tomorw im going to pick up a piece of rod that will be welded to the plate and tap so the holes of the new pipe line up. It should work... Wish me luck.
this is my bracket that will relocate the the mounting holes for the offset of the new pipe.
It started out as a 3" wide x 1/4" plate. I cut it free hand by marking with a sharpie and triming with the angle grinder a little at a time. Tomorw im going to pick up a piece of rod that will be welded to the plate and tap so the holes of the new pipe line up. It should work... Wish me luck.
Dude! Ya Can't Fix Stupid!
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
-
- CBR1000RR
- Posts: 4219
- Joined: Thu Mar 05, 2009 9:02 pm
- Location: Iowa, USA
Re: Jiang Wayne exhaust for Spree does not fit Spree
Sorry, should have clarified, variated 09 (or was it 07?) on there.not the af05.the flat flange is what made me think of it.eliteguy50 wrote:Looks like the variated pipe to me.
motormike wrote:Errands become adventures.
Re: Jiang Wayne exhaust for Spree does not fit Spree
good ole "John Wayne" LOL when my friend from taiwan told me about the name jiang wayne i had to laugh!
- patthesoundguy
- Moderator
- Posts: 3159
- Joined: Mon Mar 29, 2010 11:38 am
- Location: Nova Scotia, Canada
- Contact:
Re: Jiang Wayne exhaust for Spree does not fit Spree
It fits now... Check it out. It is a big improvement over my original exhaust which is totally baft inside and has two holes in the can where the rear baffle is broken off and rattling around inside. It is better all around, better low end and really starts to work at whatever rpm its at when it hits 20mph it is a steady pull from there right on up. I ended up finding threaded rod couplers today to finish the bracket, they were already threaded for 1$ each, just had to cut them and weld em on.
Dude! Ya Can't Fix Stupid!
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
-
- CBR1000RR
- Posts: 4219
- Joined: Thu Mar 05, 2009 9:02 pm
- Location: Iowa, USA
Re: Jiang Wayne exhaust for Spree does not fit Spree
So what is your new top speed?
motormike wrote:Errands become adventures.
- patthesoundguy
- Moderator
- Posts: 3159
- Joined: Mon Mar 29, 2010 11:38 am
- Location: Nova Scotia, Canada
- Contact:
Re: Jiang Wayne exhaust for Spree does not fit Spree
Don't know yet... Im going to the top of the hill in a bit to gps the little guy on a flat road. Ill report back as soon as I get the numbers.
Dude! Ya Can't Fix Stupid!
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
- patthesoundguy
- Moderator
- Posts: 3159
- Joined: Mon Mar 29, 2010 11:38 am
- Location: Nova Scotia, Canada
- Contact:
Re: Jiang Wayne exhaust for Spree does not fit Spree
GPS says 28mph on flat road. Now my belt is getting close to being out of spec width wise... Do you guys think I could sqeeze a couple mph more out of that thing with a new belt. I bought an automotive belt to try only $15 so worth it. That new pipe sure pulls nice as well!! hills are no match for that spree. It always handled the biggest hills with ease but now its really quite impressive. Bottom end is great midrange is superb! Any slight downward grade it will do 32mph. It sure is nice to stop quick when doing speed runs. glad I put new brakes and front brake cable on last week the rear brake cable came in the mail while I was out speeding around the neighbourhood breaking the law.
Also what affect would knobby tires have on top speed? Good? Bad? Ugly?
Also what affect would knobby tires have on top speed? Good? Bad? Ugly?
Dude! Ya Can't Fix Stupid!
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
-
- CBR1000RR
- Posts: 4219
- Joined: Thu Mar 05, 2009 9:02 pm
- Location: Iowa, USA
Re: Jiang Wayne exhaust for Spree does not fit Spree
New belt (wider) will increase top speed. Knobbies can increase to speed but decrease stability. Measure the tire height to confirm the diameter.
motormike wrote:Errands become adventures.