Hey fellas quick question,
I am attempting to get this spree retitled and have most of the paperwork finished up. There is one piece of information I am having trouble obtaining. One part of the form is asking for the Federal Certification Label Information. I do not know where to find this on the ped, and it was likely painted over by the previous owner.
Would anyone mind taking a look at their label and seeing if anything here is on there, its just standard information but for some reason I've had troubel finding it in manuals or any other posts.
1987 Honda Spree fyi
Manufactured By:Honda
GVWR:__________
GVWR Front:__________
GVWR Read:___________
Type:________________
This is the only info needed.
-Cheers
Fed. Certification Label
Moderator: Moderator
-
- Goped
- Posts: 98
- Joined: Fri Mar 30, 2012 8:33 pm
- Location: Wisconsin
-
- Goped
- Posts: 98
- Joined: Fri Mar 30, 2012 8:33 pm
- Location: Wisconsin
Re: Fed. Certification Label
This is literally the last piece of the puzzle, which has consisted of about 8 forms, a trip the old owner and the police station to verify that nothing was stolen
I'm fairly sure this is just a label on the spree itself, this is non personal info (ie. not a VIN) it just doesn't seem to posted anywhere else.
Thanks guys.
I'm fairly sure this is just a label on the spree itself, this is non personal info (ie. not a VIN) it just doesn't seem to posted anywhere else.
Thanks guys.
- martynkim
- Board Supporter
- Posts: 2899
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: Fed. Certification Label
I have never seen one. Let them know that they are dealing with a scooter. Not a Truck! They want to know what it weighs. Stick it on your bathroom scale and take a picture. See if that satisfies them.
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
-
- CBR1000RR
- Posts: 4219
- Joined: Thu Mar 05, 2009 9:02 pm
- Location: Iowa, USA
Re: Fed. Certification Label
This sticker was on the scooter but was probably peeled off. It would also have the front and rear tire pressure on it. I don't currently have a spree to check for you.
motormike wrote:Errands become adventures.
-
- Goped
- Posts: 98
- Joined: Fri Mar 30, 2012 8:33 pm
- Location: Wisconsin
Re: Fed. Certification Label
Appreciate everyone looking so far, perhaps the right person will eventually see this.
Re: Fed. Certification Label
have you looked on the front upright right behind the front wheel?
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
-
- Goped
- Posts: 98
- Joined: Fri Mar 30, 2012 8:33 pm
- Location: Wisconsin
Re: Fed. Certification Label
Tell me about it, I'm about to write 160 for the total, 83 for the rear and 77 for the front. Obviously made up numbers but it has been quite the task jumper through DMV hoops.martynkim wrote:I have never seen one. Let them know that they are dealing with a scooter. Not a Truck! They want to know what it weighs. Stick it on your bathroom scale and take a picture. See if that satisfies them.
Still I'm gonna keep pullin.
-Cheers
Re: Fed. Certification Label
The numbers they want are the Gross Vehicle Weight Rating not what the stupid thing weighs.thekingof7 wrote:Tell me about it, I'm about to write 160 for the total, 83 for the rear and 77 for the front. Obviously made up numbers but it has been quite the task jumper through DMV hoops.martynkim wrote:I have never seen one. Let them know that they are dealing with a scooter. Not a Truck! They want to know what it weighs. Stick it on your bathroom scale and take a picture. See if that satisfies them.
Still I'm gonna keep pullin.
-Cheers
Take the max weight rating in the specs in the manual, then use a 60% of it for the rear and 40% front for numbers.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
-
- Goped
- Posts: 98
- Joined: Fri Mar 30, 2012 8:33 pm
- Location: Wisconsin
Re: Fed. Certification Label
Well I'm an idiot .Bear45-70 wrote:have you looked on the front upright right behind the front wheel?
Its all right there.
GVWR:260
GVWR Front:77
GVWR Read:183
Yeeesh, ask and ye shall receive.
Thanks everyone, especially Bear.
-Cheers