Honda Spree and Elite 50 Forums

I hope this is in the right section i apologize if its not,,,,,,,,,,that being said im trying to get this look with my spree if anyone could give me the general rundown on what was done to these to make it look this way that would help out alot other than the blatantly obvious like rims and stuff how is it lowered and looks to be extened? id like to do this to my spree

You are about 2500 bucks away minus the motor good sir.. get cracking

heres my ride...
those pics were taken by my friend

What all do i need like to lower and extend it?

the look you after takes a welder ..... do you have one??
swimmingfree

the scooter you have posted have had a motor swap ... are you trying to get the look with a spree motor???
swimmingfree

I dont but im going tonhave my dad do it for me he can get one,

For now yes untill i can afford to swap the motor right now i just wanna have the look ill do performance upgrades later on

spree motor are not the best way to hop up...the look is not that hard but a b**** to explain over the net...
you need to move the shock and cut the motor mount and sterch it ..you may need to get new brake and throat cable
swimmingfree

Ok i should beable to do that doesnt sound to hard

best thing is to have your dad and his welder friend to look at this post and the photo and see what thay think...
swimmingfree

In a project like this there is no half way there. You either go all the way or go back to bed..lol.

Great looking scoot but as others have said. This isn't your everyday build and will be $$$

Anyone know a good site to get rims and a decent exhaust that would fit a spree engine? i might do a big bore kit as well.

spree dont have a lot of after marked parts .. the bbk will not give you more speed .... you will have to spend big buck to get to 40 mph ..if you get a dio it will do 40 cheep...
swimmingfree

will it make it 5mph faster? because i can get up to 35 on my spree, i changed my mind alittle i think the only thing i wanna do to the engine is add some exhaust do you know any good exhausts? and sites for rims too?

here a post on the pipe viewtopic.php?f=4&t=25345 as for rims no .
swimmingfree