I'm just going to throw this out there
Would any of you guys be interested in a drive face holding tool? I want to see what kind of pricing a CNC shop can give us if we get say... 5-10+ interested in this
Thanks
Variator/ drive face holding tool, any interest?
Moderator: Moderator
-
- Elite
- Posts: 507
- Joined: Fri Jun 11, 2010 6:52 pm
- Location: North Bay, CA
Variator/ drive face holding tool, any interest?
1995 SA50P
pop pulley
50mm Ruima
8.44:1 gears
PG Typhoon
1500k spring
1000k Polini triples
M Keli clutch
28mm Keihin PWK
OKO Polished intake
uni filter
-
- Elite
- Posts: 392
- Joined: Mon Feb 01, 2016 11:04 pm
- Location: beaverton, or
Re: Variator/ drive face holding tool, any interest?
I use a cordless impact gun to get mine off, so never had a problem holding drive face or getting nut off, so personally no interest, not sure what others think...
2000 Honda SR (purple swurp)
corsa
naruku
polini 21 cp 36/106 pod filter
polini vari 5.5 gram
zx trans
Polini evo2 clutch/bell yellow springs (slacked) yellow contra
Yasuni C16
stock crank/gears=wheelie machine
70 mph/12,470 rpm Trail tech vapor verified
corsa
naruku
polini 21 cp 36/106 pod filter
polini vari 5.5 gram
zx trans
Polini evo2 clutch/bell yellow springs (slacked) yellow contra
Yasuni C16
stock crank/gears=wheelie machine
70 mph/12,470 rpm Trail tech vapor verified
- cruzingratiot
- Elite
- Posts: 409
- Joined: Mon Jun 17, 2013 1:24 am
- Location: Detroit michigan , 2000 Purple elite s ,2001 Black elite s ,
Re: Variator/ drive face holding tool, any interest?
I use these
if you have a welder and a old pair of vice grips just make them
http://www.motorcycle-superstore.com/48 ... 6&device=c
if you have a welder and a old pair of vice grips just make them
http://www.motorcycle-superstore.com/48 ... 6&device=c
Donate Life
6-7-04 Liver Transplant Recipitant
http://www.donatelife.net/
Thank You
My 2000 Mystic Purple Elite Build
LINK -> viewtopic.php?f=16&t=27850
6-7-04 Liver Transplant Recipitant
http://www.donatelife.net/
Thank You
My 2000 Mystic Purple Elite Build
LINK -> viewtopic.php?f=16&t=27850
-
- Elite
- Posts: 507
- Joined: Fri Jun 11, 2010 6:52 pm
- Location: North Bay, CA
Re: Variator/ drive face holding tool, any interest?
yup i have a tusk clutch holder as well
Was just gauging interest as this would be a nicer solution
Was just gauging interest as this would be a nicer solution
1995 SA50P
pop pulley
50mm Ruima
8.44:1 gears
PG Typhoon
1500k spring
1000k Polini triples
M Keli clutch
28mm Keihin PWK
OKO Polished intake
uni filter
- Rip_City_Spree
- CB900F
- Posts: 1379
- Joined: Sun Jun 13, 2010 7:47 pm
Re: Variator/ drive face holding tool, any interest?
Harbor freight locking oil filter wrench. Opens just wide enough.
- Attachments
-
- image.png (235.07 KiB) Viewed 6179 times
01 Elite SR
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
Re: Variator/ drive face holding tool, any interest?
That's a good tool to have if it is easy to use and not expensive. Personally, I don't believe in using "power tools" to install nuts and bolts on aluminum, or expensive engine parts. Removing them is one thing but risking damage is not worth the time saved. Good job Ben. I'm down for finding out how much it would actually cost.
Honda Elite SR
Honda Elite-Dio ZX
Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
Honda Elite-Dio ZX
Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
-
- Elite
- Posts: 331
- Joined: Mon Feb 01, 2016 11:57 pm
- Location: Florida
Re: Variator/ drive face holding tool, any interest?
It looks like a good idea, but the cost would be a big deciding factor for me.
Re: Variator/ drive face holding tool, any interest?
I have no clue how your design works...
If those teeth are supposed to engage the fins in the variator, not liking that idea.
If those teeth are supposed to engage the fins in the variator, not liking that idea.
RideRed
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
Re: Variator/ drive face holding tool, any interest?
If your going to make something like that put a handle on it and probably half circle of teeth. Then you don't have to bolt the tool to the case you just hold the special wrench in one hand and your ratchet in the other.
01 Honda Elite S 120cc Taida H20
78 Honda Hobbit Athena
78 Honda Express/Hobbit Stage6/Athena LC 70
00 Gilera Runner PM Tuning 172
09 Aprillia SR50 Malossi Team MHR
81 Puch ZA50 Polini
71 CT70 Blue
79 Z50 Red
78 Honda Hobbit Athena
78 Honda Express/Hobbit Stage6/Athena LC 70
00 Gilera Runner PM Tuning 172
09 Aprillia SR50 Malossi Team MHR
81 Puch ZA50 Polini
71 CT70 Blue
79 Z50 Red