high or low compression? which is better and why?
Posted: Wed May 25, 2016 11:22 pm
whats better high compression or low compression? and whats the best compression to be at?
Honda Spree and Elite 50 Forums
Keeping Spree Elite Aero 50cc and Gyro Alive!
http://www.hondaspree.net/phpBB3/
high or low compression? which is better and why?
Page 1 of 1
Re: high or low compression? which is better and why?
Posted: Thu May 26, 2016 3:02 am
Yes I had a 54mm LC bore at 170psi burn at hole in less than 2miles not even in the motors powerband... I agree with G9 130to150 psi is my happy place for psi.. You'll notice a loss in power at 120 an lower..
Re: high or low compression? which is better and why?
Posted: Thu May 26, 2016 4:08 am
That is how to tune hi compression on the carb pwk 28mm get action.
My jog has 164 psi. Both metal gaskets. Running stock carb 14mm. With 92 gas.
My polini crank w/ polinI bearings has over 12,000 miles and still tight and solid.
Let the motor do the talking.
Low compression is paper gasket.
Hi compression. Metal base gasket.
The cylinder head shape vary on compression and piston using rear big window or but as piston.
My jog has 164 psi. Both metal gaskets. Running stock carb 14mm. With 92 gas.
My polini crank w/ polinI bearings has over 12,000 miles and still tight and solid.
Let the motor do the talking.
Low compression is paper gasket.
Hi compression. Metal base gasket.
The cylinder head shape vary on compression and piston using rear big window or but as piston.
Re: high or low compression? which is better and why?
Posted: Sat May 28, 2016 4:12 pm
slikolene is best oil for 2 stroke ! ftw