Sup guys wanted to know if anyone else running these scorpions came across quality issues?
Scorpion pipe weld blew at 60mph
Moderator: Moderator
-
- Spree
- Posts: 280
- Joined: Fri Feb 26, 2016 4:02 am
- Location: Hawaii
Scorpion pipe weld blew at 60mph
86 aero af16 swap. 121cc water cool.
Polini 30mm carb
Naraku mani
Scorpion stroker pipe
Stage6 CDI
5gram rollers
Keli high speed Variator
6.1 gears
94mph
Polini 30mm carb
Naraku mani
Scorpion stroker pipe
Stage6 CDI
5gram rollers
Keli high speed Variator
6.1 gears
94mph
Re: Scorpion pipe weld blew at 60mph
Ouch, better there than mid pipe tbh though. Midpipe would of covered your right leg in oil probably. Glad your safe.
1993 ch80, swapped with a ch250
2021 DRZ400sm
2021 DRZ400sm
Re: Scorpion pipe weld blew at 60mph
Why does that pipe look like it came out of a scrapyard ?
RideRed
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
-
- Spree
- Posts: 280
- Joined: Fri Feb 26, 2016 4:02 am
- Location: Hawaii
Re: Scorpion pipe weld blew at 60mph
?? I'm guessing high heat an the salty air an weather of Hawaii ??motormike wrote:Why does that pipe look like it came out of a scrapyard ?
86 aero af16 swap. 121cc water cool.
Polini 30mm carb
Naraku mani
Scorpion stroker pipe
Stage6 CDI
5gram rollers
Keli high speed Variator
6.1 gears
94mph
Polini 30mm carb
Naraku mani
Scorpion stroker pipe
Stage6 CDI
5gram rollers
Keli high speed Variator
6.1 gears
94mph
Re: Scorpion pipe weld blew at 60mph
you may have a wrong pipe displacement cc . that why blow up..
possible wrong metal thickness, welder problem buy cheap welder, wrong rod tig..
possible wrong metal thickness, welder problem buy cheap welder, wrong rod tig..
Re: Scorpion pipe weld blew at 60mph
Looks like the pipe might have been in a bind from the position it is in now that is if it is still bolted to the motor in that picture.