Hello fellow rider's i was to share my mock up of my 12 inch stretch for me spree, i wanted something simple and heavy duty so i used....
1/2 by 3 feet of steel cut into 3 bars
1 original spree mount
30 minutes of free time.
Sanding disk grinder
Welder
Easy Peezy Stretch Mount.
Moderator: Moderator
-
- Goped
- Posts: 58
- Joined: Fri Jan 19, 2018 11:25 pm
- Location: United States
-
- Goped
- Posts: 58
- Joined: Fri Jan 19, 2018 11:25 pm
- Location: United States
Re: Easy Peezy Stretch Mount.
Nice That should be fine.......until you mount up a DIO!!!
Really tho, this looks like a nice and simple stretch-stock-spree mount. Although not everyone has a welder or skills of that nature but one could be found. Thanks for the motivation!!!
You may have to find a different rear fender
Really tho, this looks like a nice and simple stretch-stock-spree mount. Although not everyone has a welder or skills of that nature but one could be found. Thanks for the motivation!!!
You may have to find a different rear fender
Honda Elite SR
Honda Elite-Dio ZX
Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
Honda Elite-Dio ZX
Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
-
- Goped
- Posts: 58
- Joined: Fri Jan 19, 2018 11:25 pm
- Location: United States
Re: Easy Peezy Stretch Mount.
The dio motor would likely pop my welds lol, i have 1 or 2 more bars to add for less flex( if any). Another 1/2 thich for the side with more room and 1/4 inch for the opposing side with the tiny stub on the motor side of the mount. I have a friend who is going to tig what i mock up when that time comes for the dio. Im realy hoping to use my panels, worst case i will heat a razor and trim the bottom to fit. I have to cut the license plate mounts to clear room for the tire. I have some more stuff planned!bonesv wrote: ↑Sat Jun 29, 2019 3:42 pm Nice That should be fine.......until you mount up a DIO!!!
Really tho, this looks like a nice and simple stretch-stock-spree mount. Although not everyone has a welder or skills of that nature but one could be found. Thanks for the motivation!!!
You may have to find a different rear fender
-
- Goped
- Posts: 58
- Joined: Fri Jan 19, 2018 11:25 pm
- Location: United States
Re: Easy Peezy Stretch Mount.
Made the mount a little safer by adding some metal as support. I will buy another piece for the left and right sides for more flex proofing. Got it straight enough.
- Attachments
-
- arrow.jpg (78.85 KiB) Viewed 4675 times
-
- arrow 2.jpg (158.87 KiB) Viewed 4675 times
-
- Noob
- Posts: 6
- Joined: Thu Jul 11, 2019 8:08 pm
Re: Easy Peezy Stretch Mount.
Nice welding work. Let's just hope it holds up. I'm not a good welder so...props to you and your work!