In need of 1988 nb50 starter spindle and electric starter
Moderator: Moderator
-
- Noob
- Posts: 7
- Joined: Mon Feb 24, 2020 9:09 am
In need of 1988 nb50 starter spindle and electric starter
Have what was sold to me as a 1988 elite but I belive is an imported PAL. Kickstart spindle is all torn up and starter is toast. I have no problem starting with a drill. Need to buy a new spindle with all the teeth intact. Any suggestions are appreciated. Also I purchased a starter that was identical and bolts up turn. But I belive its the wrong direction as the bendix does not jump out..the bendex appears to be in good working order.
-
- Veteran OG
- Posts: 3639
- Joined: Tue May 22, 2007 8:10 pm
- Location: North of Seattle, WA
Re: In need of 1988 nb50 starter spindle and electric starter
Hi,
If the belt cover looks like below, it should nail it as a Pal. In that case you will not want an NB50 starter spindle or starter.
Check partsfiche and compare P/N's with the SB50, those parts may be compatible.
--
The pic above is from an old member's thread here. http://hondaspree.net/phpBB3/viewtopic.php?t=5707
If the belt cover looks like below, it should nail it as a Pal. In that case you will not want an NB50 starter spindle or starter.
Check partsfiche and compare P/N's with the SB50, those parts may be compatible.
--
The pic above is from an old member's thread here. http://hondaspree.net/phpBB3/viewtopic.php?t=5707