Honda Spree and Elite 50 Forums

Posted: **Wed Jul 09, 2008 7:43 am**

I recently took apart the front end of my 87 Elite 50 to paint it. I got it back together and it does not feel the same, like the bike wants to lean or turn slightly. When putting it back together I didn't notice any way to adjust the front end and I didn't remove the stem from the handlebars.

Is it possible for the front end to get our of alignment and if so how can it be adjusted?
Thanks

Posted: **Wed Jul 09, 2008 12:48 pm**

Sorry, I posted this in the wrong area. Can a mod move this to the tech portion of the forum? Thanks.

Posted: **Thu Jul 10, 2008 7:54 am**

Any ideas? Thanks!

Posted: **Thu Jul 10, 2008 12:44 pm**

The little pinch bolt between the forks and handlebars can be out of adjustment but its pretty obvious.

Posted: **Thu Jul 10, 2008 3:30 pm**

Kenny_McCormic wrote:The little pinch bolt between the forks and handlebars can be out of adjustment but its pretty obvious.

I would think so but I didn't even touch that part of the forks.

Honda Spree and Elite 50 Forums

Steering geometry

Steering geometry