V8 a spree?
Moderator: Moderator
-
- CBR1000RR
- Posts: 4957
- Joined: Sun Apr 16, 2006 11:51 am
- Location: Southern Michigan
V8 a spree?
http://www.conleyprecision.com/609.htm anybody got 6 grand lying around?
I am not a mechanic, nor do I play one on TV. Actually my advice is probably worth slightly less than what you pay to view it.
How about this V-Twin?
That be 410 cubic inches , not c.c.'s
Gunbus 410 Cubic Inch V-Twin
The Gunbus 410 cubic inch V-Twin motorcycle is complete. The monster engine placed in a motorcycle frame of comparable size looked impossible and many who saw the photos were skeptical of the bike ever being finished but I guess, Clemens F. Leonhardt is one of those persistent guys who ignores the naysayers and keeps at his work.
The fuel injected, 45 degree 6728 cc / 410 cubic inch V-Twin runs through a 3 speed transmission with reverse and actually looks pretty good in its finished state compared to the initial photos, in fact, everything looks good. It puts out 523 foot pounds of torque. Seat height is 31.5 inches and overall length is 136 inches. It is a little heavy at 1433 pounds so high speed corner carving might be an issue and there aren't any photos of the big bike on the road so I guess we'll have to wait for the road test, that is if someone can actually road test this monster.
This is actually going to go into limited series production and a sidecar will be available as well which might help with balance when waiting at a light. I don't even want to think about a driveway tipover.
That be 410 cubic inches , not c.c.'s
Gunbus 410 Cubic Inch V-Twin
The Gunbus 410 cubic inch V-Twin motorcycle is complete. The monster engine placed in a motorcycle frame of comparable size looked impossible and many who saw the photos were skeptical of the bike ever being finished but I guess, Clemens F. Leonhardt is one of those persistent guys who ignores the naysayers and keeps at his work.
The fuel injected, 45 degree 6728 cc / 410 cubic inch V-Twin runs through a 3 speed transmission with reverse and actually looks pretty good in its finished state compared to the initial photos, in fact, everything looks good. It puts out 523 foot pounds of torque. Seat height is 31.5 inches and overall length is 136 inches. It is a little heavy at 1433 pounds so high speed corner carving might be an issue and there aren't any photos of the big bike on the road so I guess we'll have to wait for the road test, that is if someone can actually road test this monster.
This is actually going to go into limited series production and a sidecar will be available as well which might help with balance when waiting at a light. I don't even want to think about a driveway tipover.
-
- CBR1000RR
- Posts: 4957
- Joined: Sun Apr 16, 2006 11:51 am
- Location: Southern Michigan
-
- CBR1000RR
- Posts: 4957
- Joined: Sun Apr 16, 2006 11:51 am
- Location: Southern Michigan
- burnt_toast
- Veteran OG
- Posts: 3592
- Joined: Sat Jul 31, 2004 8:00 pm
- Location: Atlanta, GA