Back In the Saddle Again

The place to discuss rides, accessories, or whatever is tangentially Spree/Elite-related

Moderator: Moderator

Post Reply
User avatar
Wheelman-111
Moderator
Moderator
Posts: 11321
Joined: Wed Oct 22, 2008 5:09 pm
Location: Deepinnaharta, Texas

Back In the Saddle Again

Post by Wheelman-111 »

Greetings:

I had a half-inch hole in the vinyl. P.O. probably used the saddle to hold his cigar in the workshop & let it burn. :(

Duct tape kept the rain out of the foam temporarily but it sort of spoiled the look.

I got a Vinyl Repair Kit by Prematex at Wal-Mart. It comes with 6 small tubs of different colors of raw vinyl that can be blended to match any color. Used the included glue to back up the hole with a swatch of fabric. Then smear on the vinyl mixture. The most important part is to heat cure the vinyl over the repair

This is done by heating a little circular "iron" and applying it over the selected grain swatch from 3 choices to match the saddle - also included.

The repair could be better with practice, but hardly noticeable - sure better than Duct Tape!

Image
Image

Happy Patching!
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Post Reply