Page 1 of 1
Spree info
Posted: Sun May 03, 2009 9:16 pm
by Speedway_Kartworks
Ok, new to the forum, had a spree back in the late 80's , I have just aquired another spree. I want to do some upgrades on the engine, things like bigger cylider, aftermarket exhaust, bigger carb, gearing and so on. I know some might say just get a bigger bike but I like to tune on "toys".I find stuff on ebay for Honda dio, what is this? Will these products fit on my spree, if not where can I get some aftermarket tuning products, and I dont want to change engines, although the one someone else did on these forums sounds like it will rip, just want to take what I have and make it a little quicker.
Thanks in advance,
MG
Posted: Sun May 03, 2009 10:01 pm
by Kenny_McCormic
No spree performance parts exist, port it out(raise the exhaust port 1 ring width), shave the head, port the intake manifold(it flows horribly), weld up a custom expansion chamber pipe.
Posted: Sun May 03, 2009 10:13 pm
by burnt_toast
correction there appears to be a bore kit on ebay for the spree, check this thread out:
http://www.hondaspree.net/phpBB2/viewtopic.php?t=9176
Posted: Sun May 03, 2009 10:13 pm
by Speedway_Kartworks
well, that answers that. Thanks Kenny. How are you rasing the exhaust port? by base gaskets or are you moving the sleeve?
Thanks,
MG
Posted: Mon May 04, 2009 8:02 am
by toboggan
you're grinding away excess metal.
Posted: Mon May 04, 2009 8:03 am
by toboggan
Posted: Mon May 04, 2009 3:43 pm
by Kenny_McCormic
Speedway_Kartworks wrote:well, that answers that. Thanks Kenny. How are you rasing the exhaust port? by base gaskets or are you moving the sleeve?
Thanks,
MG
Dremel a rings worth off the top, there is no sleeve, its a solid cast iron jug.
Posted: Thu May 07, 2009 10:00 pm
by Speedway_Kartworks
Perfect, I gotcha.
Thanks
MG
Posted: Thu May 07, 2009 11:54 pm
by darat
Ebay has a 57CC kit for the sprees some guy is selling them. yes they are for the spree lol u have to up jet to a 75 or so