2000 honda elite S
Moderator: Moderator
2000 honda elite S
wish i took more pics during the build.
here are some pics from the recent moped cruise around the island
mine is the one with the blue front shocks
SYM dd50 block
zx trans
pg long pipe
72cc polini corsa ported
boost port matched with bore
intake port opened up
8:1 gears
ncy disk conversion with RRGS drop legs and KOSO 220mm rotor
a friend's ZX super dio
few guys, waiting for the rest
baap's current bike
top speed, slight downhill, long f*cking hold.
max temp 330*F, max rpm 10,660. no faults, no glitches, i read the manual and made sure it was all set right.
here are some pics from the recent moped cruise around the island
mine is the one with the blue front shocks
SYM dd50 block
zx trans
pg long pipe
72cc polini corsa ported
boost port matched with bore
intake port opened up
8:1 gears
ncy disk conversion with RRGS drop legs and KOSO 220mm rotor
a friend's ZX super dio
few guys, waiting for the rest
baap's current bike
top speed, slight downhill, long f*cking hold.
max temp 330*F, max rpm 10,660. no faults, no glitches, i read the manual and made sure it was all set right.
Re: 2000 honda elite S
Thanks for the pics. One question...didn't the boost port already match the bore?tabs808 wrote:boost port matched with bore
2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
- kingkamehameha
- CB900F
- Posts: 1215
- Joined: Sat Apr 16, 2011 1:11 pm
- Location: kailua kona
Re: 2000 honda elite S
Nope corsa has a slightly bigger than stock. Its not as big as a malossi bore but not
As small as a stock bore
As small as a stock bore
ua mau ke 'ea o ka aina i ka pono o hawaii
Re: 2000 honda elite S
What's the number you punched into the vapor for tire size? What duration number do you have the ports set at? You rpm to gear ratio doesn't match at all and for one a dio 72cc doesn't make that much toque to match the rpm so I'm questioning the speed claim.
Last edited by bakaracer on Mon Jan 30, 2012 6:22 pm, edited 1 time in total.
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
-
- Goped
- Posts: 76
- Joined: Thu Jun 23, 2011 6:00 pm
- Location: hawaii
Re: 2000 honda elite S
das wat we call a hamma 72 right there 80mph+
only OAHU can
only OAHU can
Re: 2000 honda elite S
moped on dyno runs
Re: 2000 honda elite S
For my tire, i came out with 1250bakaracer wrote:What's the number you punched into the vapor for tire size? What duration number do you have the ports set at? You rpm to gear ratio doesn't match at all and for one a dio 72cc doesn't make that much toque to match the rpm so I'm questioning the speed claim.
What duration number you talking about?
Oh and nice truck btw, my friend poated a pic of your truck with starions on instagrab and saod he gpt the pic off the internet. Seen your bike in the bed so im guessing its yours.
@iRiE SOULJAH next cruise not gon be bombing um, bore is half seize and weights is super flat lol
-
- CBR1000RR
- Posts: 4219
- Joined: Thu Mar 05, 2009 9:02 pm
- Location: Iowa, USA
Re: 2000 honda elite S
What is the rim size?
I calculated 76.34mph if it were an s block with met rear. A dd 12" could easily make the difference.
I calculated 76.34mph if it were an s block with met rear. A dd 12" could easily make the difference.
motormike wrote:Errands become adventures.
Re: 2000 honda elite S
^^^10" rim, 90/90 rear tire.
also got my af block, stock bore, crank, gears, rim, tire, and manifold. aftermarket ramp, pulley, weights, springs and 18mm mikuni top 61. on my tom-tom.
anythinng is possible
also got my af block, stock bore, crank, gears, rim, tire, and manifold. aftermarket ramp, pulley, weights, springs and 18mm mikuni top 61. on my tom-tom.
anythinng is possible
-
- CBR1000RR
- Posts: 4219
- Joined: Thu Mar 05, 2009 9:02 pm
- Location: Iowa, USA
Re: 2000 honda elite S
^^lol say whatever you guys want. doesn't matter how steep the hill is or if the calculations aren't right, it was hitting 76 on flat ground and 71 uphill. i don't see you guys hitting numbers like these with a 72cc. i've had this motor for the past year and a half now, nothing has changed.
let me see your guys' numbers with a 72.
let me see your guys' numbers with a 72.
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: 2000 honda elite S
ive been reading a lot about you guys in Hawaii and watch some utub vid as well .. i dont under stand why you guys get so munch more speed on your toys then we do and your rpm seem to be higher as well ..
the two things ive seen is..
one
you guys seem to report a lot more speed then us on the mane land ..and you guys show it.. i wonder if its because you guys live closer to sea level ??
two
all of you guys that report top speed like this dont have a air filter on your rides as well ... were i live my motor wood be fried or at less my reads wood be stuck open in days.... dont you guys have dust or dirt on the roads over there ????
swimmingfree
the two things ive seen is..
one
you guys seem to report a lot more speed then us on the mane land ..and you guys show it.. i wonder if its because you guys live closer to sea level ??
two
all of you guys that report top speed like this dont have a air filter on your rides as well ... were i live my motor wood be fried or at less my reads wood be stuck open in days.... dont you guys have dust or dirt on the roads over there ????
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
-
- CBR1000RR
- Posts: 4219
- Joined: Thu Mar 05, 2009 9:02 pm
- Location: Iowa, USA
Re: 2000 honda elite S
Not to call him a liar but I don't consider a vapor to be proof. A gps with video is proof.
motormike wrote:Errands become adventures.
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: 2000 honda elite S
Greetings:
Corsa jetted on the rich side and "Wheelman-Tuned" ran 69.9 here in Deepinnaharta. We're near sea level but the O2 in Texas air is scarce due to the abundance of refinery pollution and Longhorn-generated Methane. Island Air is no doubt higher in oxygen content.
I have no trouble believing 70+ from a 72cc scooter that's been carefully tuned by someone with nothing else to live for... Hills don't count in my book. That's because we have none.
Corsa jetted on the rich side and "Wheelman-Tuned" ran 69.9 here in Deepinnaharta. We're near sea level but the O2 in Texas air is scarce due to the abundance of refinery pollution and Longhorn-generated Methane. Island Air is no doubt higher in oxygen content.
I have no trouble believing 70+ from a 72cc scooter that's been carefully tuned by someone with nothing else to live for... Hills don't count in my book. That's because we have none.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: 2000 honda elite S
Swim- their rpm's are not any higher then the guys here in the states using the same exhaust. Running no filter is a fad right now over there and most of them fry their cylinders often. Majority of all the guys on this forum and on the the hawaii forum are kids still in high school or are under the age of 23. They are the ones that post speed claims all the time and they usually exagerate it by 5+mph. As we all know that another 5mph of topspeed once 70mph is reached becomes more on the science and experience level of engine performance and understanding timing numbers to pipe performance which non of these kids know about. Its the "do as the romans do" and that also means they all claim about the same speed claims to keep it uniformed.when time to prove the speed claim on a cruise when called out ,they make excuses not to prove their claim and expect you to believe them or their friends that they went those speeds.
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r