"Officially I'm Broke"
Moderator: Moderator
Re: Ruckus Horizontal Minarelli Build
that is taiwan yamaha zuma motor ( long block tranny)
- bradthreee
- Board Supporter
- Posts: 2142
- Joined: Tue Sep 12, 2006 4:20 pm
- Location: MARS...
Re: Ruckus Horizontal Minarelli Build
Hey Taz,
Just as V-dub stated, its a 2004 Zuma motor. This is the long case Minarelli style engine that comes on the Zuma's 2002 and up.
As for the mounting of the motor to the Ruckus frame, there are a few options. I went with a frame that already had mounts welded on. The other option, which is a bit more expensive, are the bolt on engine mounts. Those are around the $500 range. If you were to DIY weld-on mounts, that would cut the cost dramatically
The other portion of the install would be the wiring. Originally the Zuma had a vacuum operated fuel pump, but I have read that with Zumakus(Zuma+Ruckus) swaps there is sometimes fuel cutting out at high RPM's. I'm running a Stage6 HPC crank that ups the RPM to 16,000 max, so I opted to run the stock Ruckus electric fuel pump to ensure constant fuel delivery througout the full RPM range.
Just as V-dub stated, its a 2004 Zuma motor. This is the long case Minarelli style engine that comes on the Zuma's 2002 and up.
As for the mounting of the motor to the Ruckus frame, there are a few options. I went with a frame that already had mounts welded on. The other option, which is a bit more expensive, are the bolt on engine mounts. Those are around the $500 range. If you were to DIY weld-on mounts, that would cut the cost dramatically
The other portion of the install would be the wiring. Originally the Zuma had a vacuum operated fuel pump, but I have read that with Zumakus(Zuma+Ruckus) swaps there is sometimes fuel cutting out at high RPM's. I'm running a Stage6 HPC crank that ups the RPM to 16,000 max, so I opted to run the stock Ruckus electric fuel pump to ensure constant fuel delivery througout the full RPM range.
- bradthreee
- Board Supporter
- Posts: 2142
- Joined: Tue Sep 12, 2006 4:20 pm
- Location: MARS...
Re: Ruckus Horizontal Minarelli Build
Stopped by the shop last night and was pleasantly surprised to see the Ruckus coming together nicely!
The exhaust needed to be reheated and bent to fit onto the motor. It was originally for the European AeroX. EGT gauge sensor was installed as well and the wiring was good enough to start her up. All I have to say is DAYM this motor sounds like a beast!
Looks like it'll be ready within the next week or so.
The exhaust needed to be reheated and bent to fit onto the motor. It was originally for the European AeroX. EGT gauge sensor was installed as well and the wiring was good enough to start her up. All I have to say is DAYM this motor sounds like a beast!
Looks like it'll be ready within the next week or so.
- bradthreee
- Board Supporter
- Posts: 2142
- Joined: Tue Sep 12, 2006 4:20 pm
- Location: MARS...
Re: Ruckus Horizontal Minarelli Build
This Express was also being worked on at the same shop. I thought it was pretty kewl
- bradthreee
- Board Supporter
- Posts: 2142
- Joined: Tue Sep 12, 2006 4:20 pm
- Location: MARS...
Re: Ruckus Horizontal Minarelli Build
Picked up some new shoes today
They need a little TLC but they'll turn out just fine
They need a little TLC but they'll turn out just fine
Re: Ruckus Horizontal Minarelli Build
Those stars are sick rims!! looks like your bike is coming along good.with that engine setup you got going on there,your going to like it.lots of power for a 70cc setup and your bike is going to look good too.
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
- bradthreee
- Board Supporter
- Posts: 2142
- Joined: Tue Sep 12, 2006 4:20 pm
- Location: MARS...
Re: Ruckus Horizontal Minarelli Build
Thanks Baka I was soo excited when I picked up these Daytona rims! I had already started cleaning them up a bit when I took the pic, but man these things were dirty! They even had dog * all over them
I hope to have the bike back sometime this week so I can get these wheels put on
I hope to have the bike back sometime this week so I can get these wheels put on
- spree-rider
- Elite
- Posts: 693
- Joined: Tue Nov 03, 2009 8:24 pm
- Location: Burien, WA
Re: Ruckus Horizontal Minarelli Build
86 spree
sb 50 intake and reeds
3.00x10 rear tire
waxed
99Polaris indy 700
harliquim paint
2" bar riser
lefty throttle
ice scratchers
SLP tri keel skis
ported
high compression head
chrome low windshield
mountain bar
Xtra-10
I ALWAYS KEEP ONE ROLLED
sb 50 intake and reeds
3.00x10 rear tire
waxed
99Polaris indy 700
harliquim paint
2" bar riser
lefty throttle
ice scratchers
SLP tri keel skis
ported
high compression head
chrome low windshield
mountain bar
Xtra-10
I ALWAYS KEEP ONE ROLLED
- bradthreee
- Board Supporter
- Posts: 2142
- Joined: Tue Sep 12, 2006 4:20 pm
- Location: MARS...
Re: Ruckus Horizontal Minarelli Build
Stopped by the shop today,
and she's starting to take form. Almost there
Sorry about the plastic and tape, but you get the idea...
and she's starting to take form. Almost there
Sorry about the plastic and tape, but you get the idea...
- bradthreee
- Board Supporter
- Posts: 2142
- Joined: Tue Sep 12, 2006 4:20 pm
- Location: MARS...
Re: Ruckus Horizontal Minarelli Build
Re: Ruckus Horizontal Minarelli Build
Looks and sounds mean. Video was too short though.
- bradthreee
- Board Supporter
- Posts: 2142
- Joined: Tue Sep 12, 2006 4:20 pm
- Location: MARS...
Re: Ruckus Horizontal Minarelli Build
Im pretty new to the video thing
Ill take another one at idle for ya Vic
Ill take another one at idle for ya Vic
- bradthreee
- Board Supporter
- Posts: 2142
- Joined: Tue Sep 12, 2006 4:20 pm
- Location: MARS...
- bradthreee
- Board Supporter
- Posts: 2142
- Joined: Tue Sep 12, 2006 4:20 pm
- Location: MARS...
Re: Ruckus Horizontal Minarelli Build
Here is a couple with me on it :wasted:
Some others:
Still need to wire up the turn signals and tail light. Test fitting everything before I put on the Orange battery box, dont want to scratch that
Some others:
Still need to wire up the turn signals and tail light. Test fitting everything before I put on the Orange battery box, dont want to scratch that
- bradthreee
- Board Supporter
- Posts: 2142
- Joined: Tue Sep 12, 2006 4:20 pm
- Location: MARS...
Re: Ruckus Horizontal Minarelli Build
Tuning now thanks to all those that are helping me along the way