spree af05 e swap project cheapa$$

dabinonahonda · Post by **dabinonahonda** » Fri May 04, 2012 10:48 am

hmm just got some premixx it chuged then stoped my petcock stoped flowing fuel hmmm weird

dabinonahonda · Post by **dabinonahonda** » Fri May 04, 2012 10:50 am

not done with the tail end yet gona move and cut...

Fishman43 · Post by **Fishman43** » Fri May 04, 2012 10:51 am

Remove the end of your vac line from the intake, try lightly sucking on it and see if fuel starts flowing. Your monster air filter may have opened up the airway so much that there is minimal vac to keep the percock open.

dabinonahonda · Post by **dabinonahonda** » Fri May 04, 2012 10:53 am

Fishman43 wrote:Remove the end of your vac line from the intake, try lightly sucking on it and see if fuel starts flowing. Your monster air filter may have opened up the airway so much that there is minimal vac to keep the percock open.

sounds easy ill give this a try

swimmingfree · Post by **swimmingfree** » Fri May 04, 2012 10:58 am

you may priming the motor by putting gas oil mix down the spark plug hole or hand chocking it...
swimmingfree

dabinonahonda · Post by **dabinonahonda** » Fri May 04, 2012 11:04 am

got her fired she wants to take off down the block idel screw off maybe ?

swimmingfree · Post by **swimmingfree** » Fri May 04, 2012 11:10 am

did you down lode the Manuel for the elite?? is a just the carb as the say or you may fry the ..
motor
swimmingfree

Mystic · Post by **Mystic** » Fri May 04, 2012 11:10 am

yea turn the idle screw down or you may have the throttle slide in the carb wrong

dabinonahonda · Post by **dabinonahonda** » Fri May 04, 2012 12:16 pm

Slide seems to be in the carb right ill try to get the setting right later tonight

dabinonahonda · Post by **dabinonahonda** » Fri May 04, 2012 12:59 pm

Just picked up a MIG welded at a yard sale sickness

swimmingfree · Post by **swimmingfree** » Fri May 04, 2012 1:36 pm

hope all is good with it !!!! there a blast to have

thing you may need to look at is the rollers in it.. to see if thay have flat spot and if the back plate is off the vearter ... as well as what jet you have in the carb if it the stock one you may fry the motor...
swimmingfree

dabinonahonda · Post by **dabinonahonda** » Fri May 04, 2012 2:09 pm

i think its stock but im not sure i bought it from tiffanyspree

Post by **noiseguy** » Fri May 04, 2012 2:51 pm

You need to either buy a longer rear shock, make a dog bone extension for your existing shock, or a new frame mount point.

dabinonahonda · Post by **dabinonahonda** » Fri May 04, 2012 3:07 pm

noiseguy wrote:You need to either buy a longer rear shock, make a dog bone extension for your existing shock, or a new frame mount point.

yup im going to weld a piece of angle iron for the shock just want to get it running smooth first

dabinonahonda · Post by **dabinonahonda** » Fri May 04, 2012 4:36 pm

ok so i figured it out lol realy dumb easy fix forgot the slide spring hahah runns so good now .....now to weld a shock mount !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Honda Spree and Elite 50 Forums

spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$