Page 2 of 8

Re: '94 Elite Build (winter project)

Posted: Fri Feb 27, 2015 6:00 pm
by johnny248
This seemed like the most logical way to remove the old throttle cable and route the new one lol

Image

Re: '94 Elite Build (winter project)

Posted: Sun Mar 01, 2015 3:37 pm
by johnny248
Here is a pic of my rear wheel I just finished.thanks

Re: '94 Elite Build (winter project)

Posted: Sun Mar 01, 2015 4:19 pm
by johnny248
Thanks man! It's coming together little by little. I just wish it would warm up!

Re: '94 Elite Build (winter project)

Posted: Sun Mar 01, 2015 5:33 pm
by johnny248
This is a little oil pump block off

Re: '94 Elite Build (winter project)

Posted: Sat Mar 07, 2015 9:59 pm
by johnny248
I didn't take any pictures,

Re: '94 Elite Build (winter project)

Posted: Sun Mar 08, 2015 9:31 am
by DirtyE
I used to run sl26 on a different scooter. I used a white tire marker to fill in the PIRELLI SL26 and thought it looked pretty fly

Re: '94 Elite Build (winter project)

Posted: Sun Mar 08, 2015 9:33 am
by johnny248
Yeah I had the Sl26's 3.0x10s on it before i started my new build and I was very happy with them.

Re: '94 Elite Build (winter project)

Posted: Sun Mar 08, 2015 9:50 am
by johnny248
Do you have a pic of your white lettered tires?

Re: '94 Elite Build (winter project)

Posted: Sun Mar 08, 2015 10:09 am
by DirtyE
no. I go to my old forums scooterinvasion and grscooterclub and all my pics have been deleted. BS!!!!
http://www.scooterinvasion.net/forum/vi ... .php?t=597
http://www.grscooterclub.com/forum/phpB ... f=8&t=1362

here is a quick vid, but im not sure what tires are on it
http://youtu.be/QbL3EUingSQ

That's my vino in the clip too. Still have the vino

Re: '94 Elite Build (winter project)

Posted: Sun Mar 08, 2015 10:29 am
by johnny248
d*** man! I wish I had a crew like that out near me! I don't know any locally with a scooter.

I wish I could see those pics. Some Image shack thing whlws up. I'd like to see what the Koso gauges look like on there.

Re: '94 Elite Build (winter project)

Posted: Sun Mar 08, 2015 10:36 am
by DirtyE
I'm attempting to get into my account at www.provoscooter.com My garage has been deleted for some stupid reason, but when I search using google typing in Mikal zuma I get hits there. Have to be logged in to see pics. I may have pics somewhere, but I have no idea where. I don't think I have any pics of my 09 sr50 either. Oh well, ill always have the memories.... good and bad.

Re: '94 Elite Build (winter project)

Posted: Wed Mar 11, 2015 7:21 pm
by johnny248
Score!

Re: '94 Elite Build (winter projec[t)

Posted: Sat Mar 14, 2015 8:27 pm
by johnny248
1

Re: '94 Elite Build (winter project)

Posted: Sat Mar 14, 2015 8:34 pm
by johnny248
Got a new Polini belt for my project. The belt I took off was a Kitaco Kevlar belt which had very low miles on it. The Polini belt is a non-kevlar belt. Just did some quick measuring to see how these two belts compare. They do differ slightly. I'm not really sure what, if any difference in the way the belt works with the CVT, but just thought I'd take some measurements and share.

The Kitaco is slightly wider on the outside, and slightly narrower on the inside than the Polini. Therefore, it has more of a taper than the Polini does. The Kitaco is also a little bit taller than the Polini.

Image
Here are some measurements between the two.

Image
Image
Somewhat hard to see, but the Kitaco ribs are a little bit fatter than the Polini

Image
The top width is slightly wider on the Kitaco which you can see it with the Polini lined up on top.

Re: '94 Elite Build (winter project)

Posted: Sat Mar 14, 2015 9:39 pm
by johnny248
Stuff that really doesn't matter, b