Re: Sprelite The Begining Of My Epic Build
Posted: Sun Aug 07, 2011 8:14 pm
After seeing it all together....Its kinda scary 
Honda Spree and Elite 50 Forums
Keeping Spree Elite Aero 50cc and Gyro Alive!
http://www.hondaspree.net/phpBB3/
Sprelite The Begining Of My Epic Build
Page 20 of 21
Re: Sprelite The Begining Of My Epic Build
Posted: Sun Aug 07, 2011 8:18 pm
Trafficjamz Does Nice Work
Re: Sprelite The Begining Of My Epic Build
Posted: Mon Aug 08, 2011 5:45 pm
Ok I got the engine all figured out put it all together...gased it up....First kick, VROOOM....Instant smile on my face...I need the oko settings...The rear tire spins so i know thats not right....Thanks baka racer jets are good so far...
Re: Sprelite The Begining Of My Epic Build
Posted: Mon Aug 08, 2011 6:30 pm
After doing a few heat cycles, I took it for a quick ride (1 block) It kinda bogged and even at full throttle I was only doing like 20 maybe. Im thinking rejetting, Or new rollers? What do you guys think?
Re: Sprelite The Begining Of My Epic Build
Posted: Mon Aug 08, 2011 7:49 pm
Changed out the rollers, When people say the scorpion likes light rollers....They mean it, I have 6 grams in it now and it ran like a BEAST Bottom end needs a little work but I might mix 5 and 6 grams.....I learned not to kill it going 30 because gas built up in the hot scorpion and shot fire out of the back 
whoops....Still doing some heat cycles stay tuned 
whoops....Still doing some heat cycles stay tuned Re: Sprelite The Begining Of My Epic Build
Posted: Tue Aug 09, 2011 2:42 pm
Alright I have a 50 pilot and a 142 main with 5 gram rollers...It runs good but a bit shuttery on take off any ideas on new jets?
Re: Sprelite The Begining Of My Epic Build
Posted: Wed Aug 10, 2011 7:25 am
change to a 55 its a lil lean....
Re: Sprelite The Begining Of My Epic Build
Posted: Wed Aug 10, 2011 7:27 am
my bike is running a 55 142 with my setup and im a lil rich you should make sure you watch your temps closely....
Re: Sprelite The Begining Of My Epic Build
Posted: Wed Aug 10, 2011 11:19 am
I couldnt find a 55 in t-jamz plethera of jets, But im going to use a 54 for now...Figured its better than running lean.
Re: Sprelite The Begining Of My Epic Build
Posted: Wed Aug 10, 2011 11:30 am
Sorry I meant I have a 58 pilot....Ill stay there...
Re: Sprelite The Begining Of My Epic Build
Posted: Wed Aug 10, 2011 11:40 am
At what throttle position does the shuttering kick in? Mark your throttle grip at 1/4 ,1/2 and 3/4 and do a test. That will tell you where in your jetting you need to adjust if its a jetting issue that's causing the shutteringSpreeMadness520 wrote:Alright I have a 50 pilot and a 142 main with 5 gram rollers...It runs good but a bit shuttery on take off any ideas on new jets?
Re: Sprelite The Begining Of My Epic Build
Posted: Wed Aug 10, 2011 1:08 pm
I switched up the rollers and its running perfect, I took it to a compression test and it read 70 psi.....There is no way thats right it runs amazing....
Re: Sprelite The Begining Of My Epic Build
Posted: Wed Aug 10, 2011 1:17 pm
Ya I got your message......70psi is not right.SpreeMadness520 wrote:I switched up the rollers and its running perfect, I took it to a compression test and it read 70 psi.....There is no way thats right it runs amazing....
I will take a proper reading when I see you at the track.
Re: Sprelite The Begining Of My Epic Build
Posted: Wed Aug 10, 2011 2:01 pm
I know man I can give it half throttle at 25 and wheelie....There is definitally some more compression?
Re: Sprelite The Begining Of My Epic Build
Posted: Thu Aug 11, 2011 8:59 am
how many times did you kick it........ and was the throttle hung open?