Double Down, Ver. 1.1 new video

[KingJeff801]

Made this today

http://www.youtube.com/watch?v=cXdx6xHz1Yw

[Chicago Ben]

Made this today

http://www.youtube.com/watch?v=cXdx6xHz1Yw

haha good sh*t man! straight haulin'. It's not overly loud, it's just enough to let everyone know you are there.

[KingJeff801]

I think the V8 on my stock bike is louder than the SEF

[Chicago Ben]

I think the V8 on my stock bike is louder than the SEF

what kind of speeds are you seeing right now?

[KingJeff801]

only have 1/4 throttled it and hit 55 mph, the weather has been s*** so the next couple days I hope to get in some good breaking in!!!!!! slow and easy

[KingJeff801]

I haven't takin the virgin on a long straight away .....waiting to pop that cherry in the future when its a little more broke in, and max out my 8:44.1 gears

[burnt_toast]

looks good, and that GM pipe.. baller. glad you gonna get to play with it

whats your plan for break-in?

I remember someone saying 10 heat cycles, with load, and short ride distances was good to break in a Corsa. Also I think I remember 10 gas fills and you could consider her broken-in..

Anyone else with Corsa experiance, feel free to chime in. Been long time for me :graybeard:

[KingJeff801]

looks good, and that GM pipe.. baller. glad you gonna get to play with it

whats your plan for break-in?

I remember someone saying 10 heat cycles, with load, and short ride distances was good to break in a Corsa. Also I think I remember 10 gas fills and you could consider her broken-in..

Anyone else with Corsa experiance, feel free to chime in. Been long time for me :graybeard:

I am planning ride for 5 minutes cool for 5 minutes till I hit 30 minutes then let her cool all the way down. then repeat

[Chicago Ben]

Have you fiddled with the choke at all on the OKO? or not even necessary?

[KingJeff801]

Choke up for about 5 to 10 seconds when I start the bike and that's it

[KingJeff801]

So I have been doing some heat cycles the last couples days and don't seem to reach temps over 350. Everything seems pretty good so far, I have taken her over 55mph yet and wanna wait for a while to see her full potential. I am still running stock clutch, and stock springs. Is there any benefit to change them now?

[bakaracer]

So I have been doing some heat cycles the last couples days and don't seem to reach temps over 350. Everything seems pretty good so far, I have taken her over 55mph yet and wanna wait for a while to see her full potential. I am still running stock clutch, and stock springs. Is there any benefit to change them now?

your doing heat cycles( bike on stand at idle) or riding breakin?

[KingJeff801]

So I have been doing some heat cycles the last couples days and don't seem to reach temps over 350. Everything seems pretty good so far, I have taken her over 55mph yet and wanna wait for a while to see her full potential. I am still running stock clutch, and stock springs. Is there any benefit to change them now?

your doing heat cycles( bike on stand at idle) or riding breakin?

So far I have started bike on stand let it warm up for about 5 min, it doesn't seem to to go above 200 degrees. I ride for 5 minutes then let it idol for 5 minutes then repeat for 30 minutes total. I have done this twice. suggestions? Thanks

[bakaracer]

heat cycles are you let the bike idle on the stand. no riding. if your riding it then its a riding breakin even though your letting it cool down. if you already started the riding breakin then its to late to do heat cycles. just make sure your not going over 35mph if not your letting the rings seat wrong and possible stretching the ring lands which will cause ring rattle( sounds like little rocks in a pop can being shook)

[KingJeff801]

heat cycles are you let the bike idle on the stand. no riding. if your riding it then its a riding breakin even though your letting it cool down. if you already started the riding breakin then its to late to do heat cycles. just make sure your not going over 35mph if not your letting the rings seat wrong and possible stretching the ring lands which will cause ring rattle( sounds like little rocks in a pop can being shook)

So I did Let it idle for about 10 minutes the first time and let it cool down( sorry left that out) I know thats not enough heat cycles so is there possible damage done to my cylinder? oops already went over 35MPH, so how long should I keep it under 35MPH?