Page 4 of 5
Re: nujee scooter builds - dio spree + naked elite
Posted: Tue Nov 12, 2013 7:50 pm
by nujee
Wheelman-111 wrote:Greetings:
I agree, nicely done. Particularly the concealed wires in the frame. I know how much of a PITA that job is, but worth the time. You don't plan on running it without the left cooling shroud, do you? 90 percent of Forum posts describing that practice burn up sooner or later. The other 10% lie.
yes im not gonna use the left plastic cover. ive observed and took advice from my friend in the Philippines that had built the fastest honda dios in our town. The heat escapes faster when that side is open. But im not gonna argue to anyone in here that preffered to keep it. just happend that i trust him when it comes to tuning bikes overall.
Re: nujee scooter builds - dio spree + naked elite
Posted: Sun Nov 17, 2013 9:20 pm
by nujee
today I decided I should make a rear rack for my spree so I can carry a gallon of gas on long rides. I have 2 extra rear racks from the elite so I'm gonna mod it to fit the spree.
thought about mounting it on the front too.
il have it cleaned up.. then weld a sheet metal as a mounting base and drill holes matching the existing bolts
Re: nujee scooter builds - dio spree + naked elite
Posted: Mon Nov 18, 2013 2:08 pm
by welder steve
no f'in way you have a t27, that is my favorite car ive ever had i had a 2tg head on a 3t block setup with cheep cycle carbs, oh yeah and i was still running the 2spd toyoglide
Re: nujee scooter builds - dio spree + naked elite
Posted: Mon Nov 18, 2013 3:11 pm
by nujee
welder steve wrote:no f'in way you have a t27, that is my favorite car ive ever had i had a 2tg head on a 3t block setup with cheep cycle carbs, oh yeah and i was still running the 2spd toyoglide
haha.. one of my dream cars so I gotta have it.
Re: nujee scooter builds - dio spree + naked elite
Posted: Thu Nov 21, 2013 11:05 pm
by welder steve
it was mine i wish i never sold it i just smiled everytime i started it up
Re: nujee scooter builds - dio spree + naked elite
Posted: Fri Nov 22, 2013 12:14 am
by kingearwig
nujee wrote:kingearwig wrote:thanks for the link. The naked elite is looking good. What is your plan for a floorboard?
that i dont know yet.. i have wood floorboard done but i dont know if il put it.. Im thinking of using plexi glass also.
If you didn't already have the frame powder coated I would tell you to go with pegs... but a little late for that.
Re: nujee scooter builds - dio spree + naked elite
Posted: Sun Dec 08, 2013 5:23 pm
by nujee
quick update.
Re: nujee scooter builds - dio spree + naked elite
Posted: Mon Dec 09, 2013 10:20 am
by Wheelman-111
Greetings:
Man, that's Clean! Just a hint though, figure out some kinda front fender or don't ride in the rain...
Re: nujee scooter builds - dio spree + naked elite
Posted: Mon Dec 09, 2013 11:26 am
by nujee
Wheelman-111 wrote:Greetings:
Man, that's Clean! Just a hint though, figure out some kinda front fender or don't ride in the rain...
Ha! yeah I need some kind of fender. Thanks!
Re: nujee scooter builds - dio spree + naked elite
Posted: Mon Dec 09, 2013 5:37 pm
by Dio89Elite
beautiful build! thx for sharing!
Re: nujee scooter builds - Honda Ruckus
Posted: Tue Dec 17, 2013 11:31 am
by nujee
A bike I started building last month.. This is my 3rd ruckus. The 2nd one only lasted 3 weeks and got sold. Deadline was to make it to Vespa Scooter Annual Toy Run in San Diego (December 15, 2013). All I wanted is a simple yet clean looking ruck this time.. no gy6, no super low stance, not too stretched, not too fancy and it has to be white so I bought new shasta white rear frame and battery box. Here we go.
Stripped the bike and had front frame powdercoated. Stickerbomb the bottom part of the gas tank.
Got all the parts needed.. so I started to put them together.
put a barcode to show ownership
Had a local upholstery shop made me a seat.
Almost done..
And here it is.. done
pic taken during the toy run
Re: nujee scooter builds-elite/spree/met/xl70/xs400/ruckus,
Posted: Wed Dec 18, 2013 6:08 pm
by Downsouthdio
I couldnt get my trail tech to read my speed correctly..calibrated it correctly also
Re: nujee scooter builds-elite/spree/met/xl70/xs400/ruckus,
Posted: Wed Dec 18, 2013 7:13 pm
by Wheelman-111
Greetings:
Fine-looking Ruck, Nujee. I like the Majesty and the vintage Opel(?) too!
Re: nujee scooter builds-elite/spree/met/xl70/xs400/ruckus,
Posted: Wed Dec 18, 2013 7:44 pm
by mousewheels
Nice scooters
Wheelman-111 wrote:vintage Opel(?) too!
1974 (or so) Corolla two door? Looking better than new
Toyota_Corolla_1974.JPG
Re: nujee scooter builds-elite/spree/met/xl70/xs400/ruckus,
Posted: Wed Dec 18, 2013 10:47 pm
by nujee
Thanks!!
Wheelman- big scoot on the left is a Yamaha Morphous, i love that scoot that it made me decide that I dont need my Ninja anymore.. So I'll be selling that.
mousewheel is correct, its an old Corolla, 1973.