My Project 85 Spree AKA BlackBeauty
Moderator: Moderator
-
- Spree
- Posts: 257
- Joined: Tue Jun 28, 2011 11:24 pm
- Location: Virginia Beach
-
- Spree
- Posts: 257
- Joined: Tue Jun 28, 2011 11:24 pm
- Location: Virginia Beach
Re: My Project 85 Spree AKA BlackBeauty
So, I purchased a new petcock for my Sprite but the moment I tried to slide my hose into place effing nipple broke. What is this crappy material made out of? *!!!! BTW it was bought from ebay. Non OEM so I supposed they are inferior to Honda aluminum petcocks.
Seller contacted and they will gladly send me a replacement. Anyways, they weren't sure which one to send so they sent me two. An Elite and a Spree so, let me know if you all need an Elite petcock.
Seller contacted and they will gladly send me a replacement. Anyways, they weren't sure which one to send so they sent me two. An Elite and a Spree so, let me know if you all need an Elite petcock.
-
- Spree
- Posts: 257
- Joined: Tue Jun 28, 2011 11:24 pm
- Location: Virginia Beach
- SuprasNsprees
- Elite
- Posts: 564
- Joined: Mon Jun 20, 2011 2:05 pm
- Location: saint louis
- Contact:
Re: My Project 85 Spree AKA BlackBeauty
that sig pic is craaazy big
nice bike(s)
nice bike(s)
'86 Honda Spree : taz stage3 w/ mild porting, head milled 0.015", and pulley mod. 2k+ mies on kit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
-
- Spree
- Posts: 257
- Joined: Tue Jun 28, 2011 11:24 pm
- Location: Virginia Beach
Re: My Project 85 Spree AKA BlackBeauty
Thanks but I can't beat your avatar pic. Lmao!
-
- Spree
- Posts: 257
- Joined: Tue Jun 28, 2011 11:24 pm
- Location: Virginia Beach
Re: My Project 85 Spree AKA BlackBeauty
Here she is all complete. Stretched her legs out and top 51mph with 6g roller weights at 3/4's throttle, plenty of room for improvements. Next month I will port and polish and possibly enlarge the boost port. Well it was a fun build.
- SuprasNsprees
- Elite
- Posts: 564
- Joined: Mon Jun 20, 2011 2:05 pm
- Location: saint louis
- Contact:
Re: My Project 85 Spree AKA BlackBeauty
where did you find your motor swap ? CL ?
'86 Honda Spree : taz stage3 w/ mild porting, head milled 0.015", and pulley mod. 2k+ mies on kit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
-
- Spree
- Posts: 257
- Joined: Tue Jun 28, 2011 11:24 pm
- Location: Virginia Beach
Re: My Project 85 Spree AKA BlackBeauty
Got my Spree dirt cheap and in very good condition from CL. Elite was also dirt cheap from CL but, it was badly taken cared of cosmetically. I have a friend from Hawaii willing to sell me his stock Dio AF18E motor or a built 125cc AF16E.
Re: My Project 85 Spree AKA BlackBeauty
what bbk did you use? you probably mentioned it before but I am curious
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
-
- Spree
- Posts: 257
- Joined: Tue Jun 28, 2011 11:24 pm
- Location: Virginia Beach
Re: My Project 85 Spree AKA BlackBeauty
I have a 50mm PG bbk.
Re: My Project 85 Spree AKA BlackBeauty
what jets are you running? I wouldnt try it now but after break in you should get more than 51mph i would think
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
-
- Spree
- Posts: 257
- Joined: Tue Jun 28, 2011 11:24 pm
- Location: Virginia Beach
Re: My Project 85 Spree AKA BlackBeauty
Not big.enough of a jet. Steve from VTCYCLES replaced the stock jet that came with my 28 Oko but, he I forget what he used. Are there numbers on the jets?
Re: My Project 85 Spree AKA BlackBeauty
Yes there are.sprite2011 wrote:Are there numbers on the jets?
2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
-
- Spree
- Posts: 257
- Joined: Tue Jun 28, 2011 11:24 pm
- Location: Virginia Beach
Re: My Project 85 Spree AKA BlackBeauty
Installed new front shocks. Thanks wheelman for this great idea. Scooter sits perfectly leveled thanks to the extra height. Damping has improved but too bad rebound is not adjustable. Oh well, has improved its character even more.
Re: My Project 85 Spree AKA BlackBeauty
looks great man, i thought about doing something like that for my clutch bell but I live on a gravel road and dust and dirt would get in there. I have an extra cover half that I have been working on, about have all the paint steelwooled off and buffed to a shine. may just dremel some holes in the face of it and cut out a kewl design on the part you can see from behind
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma