Honda Spree and Elite 50 Forums

We are going all out on this one.

Big bore AND spree gears.

Plus the magic stick was in full effect, smoothing and shaping the 44mm jug into silky smoothness.




This is a view of the exhaust port of the 44mm jug

And here it is opened up with the magicstick (demel tool)


Silky smooth

Not silky smooth


Smoothed all the casting marks on all ports.

Replacing the stock 68 jet with the 85

KICKASS! Let me know how it turns out man. I got the bbk now, just waitin to get some gears for it. Lemme know how fast ya get er upto once ya break it in. also keep me posted on break in process!!

Another question..WHERE did ya get that SWEEEEEEETTTTTT clutch drum at? i LIKE IT!! lol

and one last question.. happend to your bystarter tube? Loose control of da magic stick? lol

I will let you know how break in goes. I will post results here.
The clutch bell has an Audiobahn car audio amp fan cover bolted to it. It does nothing but add bling.

I did not really even notice the bystarter tube til you said it was f**ked up!

Has anyone ever seen this kind of damage on a bystarter tube?

Looks like somebody tried to pluck it out with a pair of pliers and failed.

Audiobahn, DUH!!! s*** i shoulda knew it! i thought that design looked familiar!

yah ill let ya know how my break in goes too.. That oughta be TODAY!

I'm glad i was able to point out the by starter tube for ya. lol i seen it and was like whoa..Carnage in side the carb..how did that come about? lol

Wish me luck!

You still need an air filter idea? Check my "Preping for BBK" post. I made one today for 10 bucks. Looks and works Excellent!

My air filter for the bbk:

SUPPLIES
One 20oz pop bottle top
JB weld
Cheap air filter form autozone

TOOLS
Magic stick (dremel with cutting bit)
Heat gun


Take the bottle cap and cut out the top with the magic stick, also grind out the caps threads.
Use the heat gun to warm the newly cut cap.
Push the cap on to your carb. Let it cool down enuff that it keeps it's shape.
Pull the cap off the carb and use it to mark a hole on the Cheap air filter.
Cut the cheap filter so that the holes from the cap and the filter are the same size.
"glue" it all together with the JB weld.

I used some jb weld to block off this extra intake inlet too.

This intake was also opened up a bit with the magic stick.


And once I start playing around with the Magicstick, I cant stop.
Here is the begining work for Knife edging the ports on the case.

Did Tazland Spree gear swap also. Every thing went together with no issues. Sorry I did not get many pics





Tomorrow should be the day to here this thing run.

I hope all the extra port smoothing and stuff helps. I guess I will nknow soon enuff.

Very nice air filter! i like the craftsman ship! your freakin good with the magic stick man!

SO, knifes edge, is that an ideal porting method? i was gonna grind all my edges N stuff to but decided to keep grinding dust N stuff away and outta motor at all possibe costs. i did knock a few edges off the inside of the intake (had a piece of casting stickin out..i was like, wtf..BRRRRRRRRT.. Off with its oblonged pertruding-ness. ) lol

SWEEEET!! yah i fully intend on gettin gears as well, but cash flo is low at the moment...i just legalized my ole ladys car today so funding is down..till Sat.. SCRAP IS UP! WOOOO!!!

Anything to help air flow better is a good thing.

My friend, spreetard, has a 1987 spree that only has magicstick port work done and his top end is around 42mph
No bbk and no gears. just more free flowing nq50 powah! (power)

whoa... (gets new pants...)

i may be tearin mine apart again.. lol

i GOTTA find me a complete motor to experiment with.. One i can tear apart on my kitchen table and make Perfect! lol

..."sweetie, pass me the butter.. its near the starter bendix.." hahahahaha

My buddy with a scrapper truck came by today and picked up crap from around my shop.

between the copper wire and old metal, I made $120 today. I think steel is up to $250 a ton here and copper is $1 per pound.