Page 1 of 1
Spree Chamber coming
Posted: Mon Nov 23, 2009 10:45 pm
by mookie
http://cgi.ebay.com/ebaymotors/ws/eBayI ... MEWNX%3AIT
looks like i'll be trying to make a stock displacement Spree go faster soon...
reminds me- i need to take a head to the machinist tomorrow...
my goal is to have the ugliest fastest Spree around.
i'm halfway there...
Re: Spree Chamber coming
Posted: Wed Nov 25, 2009 3:35 pm
by mr pibbs
mookie wrote:
looks like i'll be trying to make a stock displacement Spree go faster soon...
Sounds like an interesting endeavor. keep us posted
Re: Spree Chamber coming
Posted: Mon Dec 07, 2009 12:01 pm
by mookie
almost ready for a test run.
stock everything initially then i tune IF it shows promise....
Re: Spree Chamber coming
Posted: Mon Dec 07, 2009 12:19 pm
by Wheelman-111
Greetings:
That's one bad-* Spree-pipe, Mooks. I wish mine went up 'n over too. It would save on underwear cleaning when I drag it on sharp right-handers...
Whatcha gonna do about plastic?
Re: Spree Chamber coming
Posted: Mon Dec 07, 2009 12:54 pm
by sugarshane
can't wait for your results
Re: Spree Chamber coming
Posted: Mon Dec 07, 2009 3:27 pm
by mookie
Wheelman-111 wrote:Greetings:
That's one bad-* Spree-pipe, Mooks. I wish mine went up 'n over too. It would save on underwear cleaning when I drag it on sharp right-handers...
Whatcha gonna do about plastic?
i can't/won't cut up the stock Spree plastics so i suppose another set or at least a right side red would be nice to find in similar condition as the left.
i don't forsee having to remove a LOT of material for the panel to be in place and there be clearance tween it and the pipe.
of course i'll need to use header wrap here and there.
it would be a bonus IF the pipe adds some power and at the very least NOT rob it of any!!!
i could live with that for the bling factor if nothing else.
i have a LV pipe coming from a ebay purchase and i might do a high pipe of it for something.
Wheelman- if you would be willing to pay the shipping to and from i can ship you my Proma 16 pipe for testing and if you like i can build you a new one for appx. 160 shipped.
Re: Spree Chamber coming
Posted: Mon Dec 07, 2009 4:05 pm
by Wheelman-111
Greetings:
Is that Proma for SA/16? It's tempting to try it out, but what if I like it? Evidently rare and hard to find...
Re: Spree Chamber coming
Posted: Tue Dec 08, 2009 1:15 am
by mookie
this is my second pipe from Sir Patrick, Lord of Daywot.
a fine lad with the utmost integrity. tis true.
it be a hidden trasure from the youg lad it be.
Re: Spree Chamber coming
Posted: Tue Dec 08, 2009 8:35 am
by Wheelman-111
Greetings:
Aye, but be it a bolt-on application? Or requires it Mastery of the Flames of Vulcan for forging yon header pipe? Methinks my own skills thereat inferior to those of The Village Idiot.
Furthermore, can it fit 'neath yon bonny plastic? Said virgin panels must remain unmolested lest the Colony consider Flash to be Damaged Goods.
Re: Spree Chamber coming
Posted: Tue Dec 08, 2009 6:34 pm
by mookie
aye... aye...
a bit of Forging and Sorcery required lad.
aye...aye...
Re: Spree Chamber coming
Posted: Tue Dec 08, 2009 7:39 pm
by mr pibbs
you guys are crazy
Re: Spree Chamber coming
Posted: Wed Dec 16, 2009 6:07 pm
by Spreetard
mr pibbs wrote:you guys are crazy
You JUST noticed that????